Crestron infiNET CLW-SLVS1RF Operation Manual page 21

Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF
Operations Guide - DOC. 6397
CLW-DIM1RF Devices in Setup Mode Window; Identifying a Device
The LEDs on all of the CLW-DIM1RF dimmers on the list will flash.
9. Physically locate the dimmer in the bedroom with the flashing LED and
touch the top or bottom of the large button. The status of the "BR
dimmer" will change from "Not Verified" to "Setup Complete" and the
next device on the list (CLW-DIM1RF, MNET ID 03, "LR dimmer")
will be highlighted.
Touching a device may result in setting a duplicate MNET ID. A
warning will be displayed.
Duplicate MNET ID Warning
Click Yes to set the device to the duplicate MNET ID (the status will
be listed with the comment "An error occurred changing the network
ID of one or more devices." Clicking No will skip the setup process for
that device and continue to the next device on the list.
If two devices share a duplicate MNET ID, the devices with the
duplicate MNET IDs must be set up again.
NOTE: If the device does not respond and/or register, click Skip.
infiNET Switches: Crestron CLW-SW1/4RF, -SWS1/4RF, -SLVS1RF • 17
infiNET™ Switches