Returning Devices; Integrated Management System - ABB Sensyflow FMT400-VTS Commissioning Instructions

Safety
1.7

Returning devices

Use the original packaging or a secure transport container of an appropriate type if you need to
return the device for repair or recalibration purposes. Fill out the return form (see the Appendix)
and include this with the device.
The EU Directive governing hazardous materials dictates that the owners of any hazardous
waste are also responsible for disposing of it.
All devices delivered to the manufacturer must be free from any hazardous materials (acids,
alkalis, solvents, etc.).
Pipe components and flowmeter sensors contain hollow spaces. If they have been used in
conjunction with hazardous materials, they must therefore be rinsed out in order to neutralize
any such substances.
The owner will be charged for any costs incurred as a result of the device not having been
adequately cleaned or of any failure to dispose of hazardous materials. The manufacturer
reserves the right to return a contaminated device.
Please
Please contact Customer Center Service acc. to page 1 for nearest service location.
1.8

Integrated management system

ABB Automation Products GmbH operates an integrated management system, consisting of:
• Quality management system to ISO 9001
• Environmental management system to ISO 14001
• Occupational health and safety management system to BS OHSAS 18001 and
• Data and information protection management system
Environmental awareness is an important part of our company policy.
Our products and solutions are intended to have a minimal impact on the environment and on
people during manufacturing, storage, transport, use, and disposal.
This includes the environmentally-friendly use of natural resources. We conducts an open
dialog with the public through our publications.
8 - EN Sensyflow FMT400-VTS, FMT400-VTCS CI/FMT400-VTS/VTCS-X1