Table of Contents
Advertisement
Pos: 4.14 /Sicherheit/Durchfluss/Allgemein/Sicherheitshinweise zur elektrischen Installation (Durchfluss) @ 0\mod_1129733762419_3101.doc @ 3267 @ 2
1.6
Safety instructions for electrical installation
The electrical connection may only be made by authorized specialist personnel according to the
electrical plans.
The electrical connection information in the manual must be observed; otherwise, the electrical
protection type may be adversely affected.
Ground the measurement system according to requirements.
Pos: 4.15 /Sicherheit/Durchfluss/FMT500-IG/Rücksendung von Geräten (Therm. Masse-Durchflussmesser) @ 27\mod_1240227589937_3101.doc @ 260031 @ 2
1.7
Returning devices
Use the original packaging or a secure transport container of an appropriate type if you need to
return the device for repair or recalibration purposes. Fill out the return form (see the Appendix)
and include this with the device.
The EU Directive governing hazardous materials dictates that the owners of any hazardous
waste are also responsible for disposing of it.
All devices delivered to the manufacturer must be free from any hazardous materials (acids,
alkalis, solvents, etc.).
Pipe components and flowmeter sensors contain hollow spaces. If they have been used in
conjunction with hazardous materials, they must therefore be rinsed out in order to neutralize
any such substances.
The owner will be charged for any costs incurred as a result of the device not having been
adequately cleaned or of any failure to dispose of hazardous materials. The manufacturer
reserves the right to return a contaminated device.
Pos: 4.16 /Sicherheit/Allgemein/Adresse für Rücksendung (Temperatur und TM-Durchflussmesser) @ 32\mod_1247737276859_3101.doc @ 288547 @
Please
Please contact Customer Center Service acc. to page 2 for nearest service location.
Pos: 4.17 /======= Seitenumbruch ======== @ 0\mod_1126532365768_3101.doc @ 3830 @
42/14-42-EN
Sensyflow FMT700-P
Safety
7
Advertisement
Table of Contents
