Table of Contents
Advertisement
Quick Start Guide Prestigio Digital Signage Video Wall
Removing a power supply:
• Use a 6mm cross head screw driver to remove the screws on the cover on the pole
extrusion.
• Take the cover and the power supply off the pole carefully.
• Unfasten the screws on the connectors of the power supply with a screw driver.
Disconnect the cables to the power supply.
• Remove the 4 screws in the rear side of the power supply fixing plate, and then remove
the power supply.
Fixing the power supply is in a reverse order of removing it, with special attention to be paid
to the proper connection of the cables to the power supply.
EN - 26
Advertisement
Table of Contents
