Prestigio PP2.97 Quick Start Manual page 11

Quick Start Guide Prestigio Digital Signage Video Wall
CAUTION: If the LED video wall is to be mounted on a wall, one has to consider the
withstanding capability of the wall. In such a case, it's usually advised to install
the LED video wall onto the structural column of the wall.
TIPS:Connection positions on the back supporting structure* must match those on the LED
video wall.
Mounting the extrusion frame*
After mounting the die-casting aluminum cabinets, installation of other structural frames
are to follow.
Assembling the extrusion frame
Necessary tools:
• 8mm open-end wrench
• 8mm box-end wrench
• 8mm hexagonal key
• 6mm Cross head screw driver
Connect the 4 sides of the main extrusion on a flat ground. Insert corner blocks onto the
connection positions of the main extrusion. Screw them in a loose manner.
*supporting structure is not included.
*extrusion frame is not included. It can be purchased additionally.
EN - 8