• Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Prestigio P260DVD-X P420DVD-X...
Page 3
WARNING: This apparatus should be connected to a MAINS socket outlet with a protective earthing connection. Prestigio P260DVD-X P420DVD-X...
Page 4
Overview Front View Prestigio P260DVD-X P420DVD-X...
Page 5
7. MENU: To access or close menus, simultaneously. 8. TV/VIDEO: Selects an external device connected to the TV. <DVD> - Depend on the model 9. PLAY/PAUSE: Play the DVD or temporarily stop playback. 10. STOP: Stop the DVD playback. 11. OPEN/CLOSE: OPEN/CLOSE the DVD. Prestigio P260DVD-X P420DVD-X...
6. VIDEO3 (VIDEO/AUDIO) INPUT JACKS 7. S-VIDEO INPUT JACK 8. DIGITAL AUDIO OUTPUT JACK 9. SCART JACKS (BOTTOM : SCART1, TOP : SCART2) 10. HEADPHONE JACK : Used for headphones that can be purchased additionally. 11. TV ANTENNA INPUT JACK Prestigio P260DVD-X P420DVD-X...
41. SIZE/SUBTITLE: Teletext size selection/For selecting the SUBTITLE language. 42. CANCEL/CANCEL: To exit from the teletext display/To erase a program content. 43. SUB PAGE/ZOOM: Teletext SUB-PAGE/For magnifying the screen. 44. NEXT PAGE/BOOK MARK: Teletext NEXTPAGE/ To SAVE a specific frame for later viewing Prestigio P260DVD-X P420DVD-X...
1. Turn the TV on, and select ‘VIDEO1’ using the LINE button on the remote control. 2. If you have a second VCR and wish to copy cassette tape, connect the source VCR to SCART1 and the target VCR to SCART2 so that you can redirect the signal from SCART1 to SCART2. Prestigio P260DVD-X P420DVD-X...
- If your VCR does not support stereo sound, connect the mono audio out jack to the AUDIO INPUT (left) jack. Procedures for watching a video over a VCR Turn the TV on, and select ‘VIDEO 3’ using the LINE button on the remote control. - If you have connected a S-Video cable, select ‘S-VIDEO’. Prestigio P260DVD-X P420DVD-X...
Page 10
1. The COMPONENT VIDEO IN and COMPONENT AUDIO IN connectors are used for equipment with a DVD or DTV receiver out. (480i/60Hz, 480p/60Hz, 576i/50Hz, 576p/50Hz, 720p/50Hz, 720p/60Hz, 1080i/50Hz,1080i/60Hz) To watch the DTV 1. Turn the TV on, and select ‘COMPONENT’ using the LINE button on the remote control. 2. Turn the DTV Receiver on. Prestigio P260DVD-X P420DVD-X...
Page 11
2. Connect the DVI audio input jacks of the TV and the DVI audio output jacks of your DTV Receiver with the audio cable (480p/60Hz, 576p/50Hz, 720p/50Hz, 720p/60Hz, 1080i/50Hz,1080i/60Hz). 3. VESA Standard Mode (Resolution/Vertical Frequency) • 800x600/60Hz, 800x600/72Hz, 800x600/75Hz, 1024x768/60Hz, 1024x768/70.1Hz,1280x768/60Hz. Prestigio P260DVD-X P420DVD-X...
Viewing the Status Information Press the DISPLAY button on the remote control. The TV will display the input source, the picture mode, the sound mode, the STEREO mode, the sleep time, the current time, and the pip mode. Prestigio P260DVD-X P420DVD-X...
The tune scans the frequency range until the first channel on the channel that you selected is received on your screen. 7. Select STORE using the /\ / \/button and then press the > button. 8. Repeat Step 5 to 7 for each channel to be stored. Prestigio P260DVD-X P420DVD-X...
Everything previously locked will be unlocked. 1 - 4. STEP1~STEP4 is the same as that of Activating the Child Lock. 5. When a login dialog box appears, enter the password to deactivate the CHILD LOCK. Prestigio P260DVD-X P420DVD-X...
When a program number is skipped it means that you will be unable to select it using the /\ / \/ button during normal TV viewing. If you want to select the skipped program, directly enter program number with the number buttons or select it in the program edit or table menu. Prestigio P260DVD-X P420DVD-X...
2. Select PICTURE using the </> button. 3. Select the desired PICTURE STATUS using the </> button. Whenever you press this button, PICTURE STATUS changes to STANDARD >DYNAMIC >MILD >USER mode, in this order. 4. Press the EXIT button to exit the menu. Prestigio P260DVD-X P420DVD-X...
• STANDARD: Select this to listen to sound normally. • MUSIC: Select this to listen to the original sound. • SPEECH: Select this to listen to clear voice sound. • USER: Select this if you want to adjust the settings according to your personal preferences. Prestigio P260DVD-X P420DVD-X...
4. Select the desired volume level using the </> button. Adjusting the Equalizer Determines the volume of the frequency range (low to high tones). 1. Press the TV.MENU button. The OSD MENU will be displayed. 2. Select SOUND using the </> button. Prestigio P260DVD-X P420DVD-X...
Type of broadcast On-Screen NICAM STEREO Standard broadcast MONO Regular+NICAM MONO MONO NICAM STEREO NICAM STEREO<-> MONO NICAM DUAL NICAM MAIN -> NICAM SUB A2 STEREO Standard broadcast MONO Bilingual or DUAL MAIN <-> SUB STEREO STEREO <-> MONO Prestigio P260DVD-X P420DVD-X...
• The freezing function will not work for the PIP window in PIP mode. Viewing Picture-in-Picture You can watch two videos on the screen simultaneously. Quick! Pressing the ON/OFF button. Pressing the button turns the PIP screen on or off. Prestigio P260DVD-X P420DVD-X...
5. Select CHANNEL using the /\ / \/ button. </> 6. Select the desired channel using the button. Since this product has a single tuner, you cannot watch two TV channels simultaneously when in PIP mode. 7. Press the EXIT button to exit the menu. Prestigio P260DVD-X P420DVD-X...
Swapping the Main and the PIP Window You can swap the video source of the main screen and the PIP window. Quick! Pressing the SWAP button. Whenever you press this button, the video source of the main screen and PIP window are swapped. Prestigio P260DVD-X P420DVD-X...
6. Press the EXIT button to exit the menu. Setting the On/Off Timer You can set the On/Off Timer to automatically turn the TV on and off at a desired time. The current time has to be configured first to set the On/Off Timer. Prestigio P260DVD-X P420DVD-X...
1-3. STEP1~STEP3 is the same as that of Setting the clock. 4. Select SLEEP using the /\ / \/ button. 5. Configure the SLEEP time using the </> button. 6. Press the EXIT button to exit the menu. Prestigio P260DVD-X P420DVD-X...
4. Enter the password using the numeric button. Initial password is 0000. 5. Enter the change password using the numeric button. 6. To confirm, enter and confirm new password using the numeric button. Note: Please remember the password should be a 4 digit numeric value. Prestigio P260DVD-X P420DVD-X...
Result: The current page counter is incremented and the page is then displayed. 2. If the selected page is linked with several secondary pages, the secondary pages are displayed in sequence. To freeze the display on a given page, press the HOLD. Press the HOLD again to resume. Prestigio P260DVD-X P420DVD-X...
3. To display the previous or next page, press the corresponding coloured button. 4. To display the subpage, see the following steps. • Press the SUBPAGE button. Result: The available subpages appear. • Select the required sub-page. Sub-pages can be scrolled by using the PREPAGE or NEXTPAGE button. Prestigio P260DVD-X P420DVD-X...
3. Adjust the PC screen. (For adjustment procedures, refer to the corresponding chapter of this manual.) VESA Standard Mode Resolution 640x480 640x480 640x480 800x600 800x600 800x600 1024x768 1024x768 1280x768 Vertical Frequency 60.0Hz 72.0Hz 75.0Hz 60.0Hz 72.0Hz 75.0Hz 60.0Hz 70.1Hz 60Hz Prestigio P260DVD-X P420DVD-X...
Auto Adjust You can adjust the frequency and the phase of the PC screen automatically. 3. Select AUTO ADJUST using the /\ / \/ button and then select using the > button. The PC screen is adjusted automatically. Prestigio P260DVD-X P420DVD-X...
2. Press the << or >> button. • For disc playback, pressing the button executes the function in the following order: X1/2 > X1/4 > X1/8 > X1/16 > X1/32 > X1/64 > NORMAL 3. Press the PLAY/PAUSE button to resume normal playback. Prestigio P260DVD-X P420DVD-X...
• If you press the direction button during the zoom mode, the zoom point will shift. • To resume normal playback, press zoom button repeatedly until the repeat mode indicator disappears on screen. • This function is activated for only DVD playback. Prestigio P260DVD-X P420DVD-X...
This function is used to go to the Chapter, Track or Song of the disc you want. Program play DIRECT Search (GO TO) for DVD 1. Press the GOTO button. 2. Select the item using the </> button and press the ENTER button. Prestigio P260DVD-X P420DVD-X...
• Do not play CD-R/RW discs containing any files other than music CD files, MP3 and JPEG files. • Programmed playback is not possible with MP3 discs. • When writing MP3 files on CD-R/RW discs, select "ISO9660 level 1" as the writing software format. Prestigio P260DVD-X P420DVD-X...
• The selected item is displayed as a full size picture. Changing the Size of the Screen 1. Press the ZOOM button. • Each press of the ZOOM button changes the zoom mode in the following order: (<<) 25% > 50% > 100%(default) > 150% > 200%(>>). Prestigio P260DVD-X P420DVD-X...
• When the MP3 FILE track moves to the next one, the JPEG picture will be moved to the next one too. 5. Stopping slide show mode • Press STOP button to stop MP3 FILE and SLIDE SHOW. Prestigio P260DVD-X P420DVD-X...
• VIDEO : The optimal display at movie mode will be selected. • SMART : The optimal display will be displayed by the combination of Film and Video. SCREEN SAVER - You can select the screen protection function 'On' and 'Off'. Prestigio P260DVD-X P420DVD-X...
- MPG Logo : To use the original initial screen. - JPG Logo : To use the initial screen downloaded from CD. If you use DivX (option), the JPG logo is applied. If you use DVD (option), the JPG logo is not applied. Prestigio P260DVD-X P420DVD-X...
Page 38
• The Password is preset to 0000. • Default - If user selects reset from the setup menu, all the value of setup menu will be initialized by factory setting value. (Exception: Parental level and Password values will not be changed.) Prestigio P260DVD-X P420DVD-X...
9. You will see below message. This rental video has X view left. A view ends when you stop playback, play a different video, or trun off your player. Do you want to use one of your X views now? Prestigio P260DVD-X P420DVD-X...
Wall mount rack as LCD TV. Regarding purchasing Wall mount Rack, please contact the shop you purchased LCD TV. For detailed installing procedure of Wall mount rack please refer to “Wall Mount Rack Installing Guide”. Prestigio P260DVD-X P420DVD-X...
The entire screen flickers. This product has been optimally set to watch TV channels in the factory. There may be flickering when you watch still images from a PC. This is not a problem of the product. Prestigio P260DVD-X P420DVD-X...
Page 42
If a problem has been detected, unplug the power cable from the wall outlet first. Using the product when it has a fault may cause electric shocks or fire. Do not place objects near the wall outlet so that you can unplug the power cable if necessary. Prestigio P260DVD-X P420DVD-X...
694.4 X529 X 122 (26 inch WIDE) 16,772,216 colors 819 X 594 X 131.5 (32 inch WIDE) Maximum Resolution 958 X 660.5 X 138.5 (37 inch WIDE) 1280 X 768 1073 X 772 X 141 (42 inch WIDE) Separation Signal Prestigio P260DVD-X P420DVD-X...