Prestigio PP2.97 Quick Start Manual page 14

Quick Start Guide Prestigio Digital Signage Video Wall
• After the Pole extrusions and the side Main extrusions have been installed and hang
vertically, one can start to mount the Main extrusion on the bottom.
• With the aid of a Modular tool, fasten the screws on the top of the Pole extrusions and
then those at the bottom. Then fasten the connection screws of the bottom Main
extrusion with the back supporting structure fast.
Fixing the LED Video Wall
Before mounting the LED video wall, attention must be paid to the following few things:
• Make sure that the frame of the LED video wall has been properly connected with the
supporting structure, that everything is in good condition on the horizontal and vertical
direction of the LED video wall and that the installation surface is flat and even.
• Check if the cabinets are installed in their extract positions with the help of a Modular tool.
Installation of the LED cabinets starts from the middle column from bottom to top and then
towards both sides.
EN - 11