Overview; Equipment - Alarm.Com Flex IO Installation Manual

Overview

The Flex IO enables new levels of
flexibility for monitoring valuable
property and assets anywhere that
LTE connectivity is available.
Whether used with a backyard gate
or a remote storage unit, the Flex IO
empowers users to keep an eye on
what matters most. It can be used
with the included magnet to
monitor doors, gates, and other
entryways. It also comes equipped
with input and output options for
integrating compatible devices that
lack long-range connectivity.
This guide covers the basics of setting up
and mounting your Flex IO.
For detailed instructions, including how to leverage the built-in
loop input and relay output option, visit our Knowledge Base:
answers.alarm.com/?cid=adcpartnerflexio
2

Equipment

In the box
• Flex IO
• Magnet
• AA 1.5 V lithium batteries (x4)
• Installation guide
• 300 kΩ resistor (optional)
Recommended tools and supplies
(not included)
• Phillips head screwdriver
• Zip ties (up to 3 recommended:
2 for Flex IO and 1 for magnet)
• #8 Phillips screws (x4)
• Paper clip (to press Flex IO diagnostic button;
see Cellular Signal Strength)
Loop input and relay output tools and supplies
(if required; not included)
• 18-22 AWG wire
• Power supply (ADC-FLEX-100-PS)
• Wire retention clip (ADC-FLEX-100-WRC)
Flex IO
AA Batteries
Magnet
Resistor (optional)
Installation
Guide
3