Table of Contents
Advertisement
Quick Links
LIST OF PRODUCTS
Digital Multimeter
Digital AC & AC/DC Clampmeter
AC Clamp Adaptor
AC/DC Current Adaptor
Thermo Anemometer
Thermo Hygrometer
Distance Meter
Digital Lux Meter
Network Cable Tester
Power Factor Regulator
Earth Resistance Tester
Digital Panel Meters
DC Power Supplies
High Voltage Detector
Calibrators
Gas Analysers
Frequency Counter
Function Generator
Phasing Sticks
Battery Tester
Waterproof Pen Testers
Solar Power Meter
EMF Detector
Wood, Paper & Grain Moisture Meter
Transistorised Electronic Analog & Digital Insulation
Resistance Testers(upto 10 KV)
Digital Sound Level Meter & Sound Level Calibrator
Digital contact & Non-contact Type Tachometer
Digital Non-contact (infrared) Thermometer
Maximum Demand Controller/Digital Power Meter
Digital Hand Held Temperature Indicators
G 17, Bharat Industrial Estate, T. J. Road,
Sewree (W), Mumbai - 400 015. INDIA.
Sales Direct : (022) 24156638
Tel. : (022) 24124540, 24181649. Fax : (022) 24149659
Email : kusam_meco@vsnl.net
Website : www.kusamelectrical.com
www.kusam-meco.co.in
®
AN ISO 9001:2008 COMPANY
DIGITAL COATING
THICKNESS GAUGE
MODEL - KM 117A
OPERATION MANUAL
® ®
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Kusam-meco KM 117A
Summary of Contents for Kusam-meco KM 117A
- Page 1 Digital Sound Level Meter & Sound Level Calibrator Digital contact & Non-contact Type Tachometer Digital Non-contact (infrared) Thermometer Maximum Demand Controller/Digital Power Meter MODEL - KM 117A Digital Hand Held Temperature Indicators ® G 17, Bharat Industrial Estate, T. J. Road, Sewree (W), Mumbai - 400 015.
-
Page 2: Table Of Contents
® ® DIGITAL COATING TABLE OF CONTENTS THICKNESS GAUGE TITLE PAGE NO. MODEL - KM 117A Introduction..........Features............III. Safety Information........IV. Specifications..........Product Use..........Measurements..........VII. Maintenance ..........VIII. Test Certificate........... IX. Warranty............ -
Page 3: Introduction
3. Do not keep or use this unit in an environment where it will be directly illuminated by sunshine, or where it condensation. If KM 117A is a ferrous coating thickness gauge designed for simply you do, it may be deformed, its insulation may be damaged, or one hand operation. - Page 4 ® ® 2. WARNING : Recommended operating conditions (> 30cm) A. Electromagnetic Field Interference : This instrument uses magnetic field method to measure the coating thickness on ferrous metal base. If this meter was placed in the environment with 20mG (mini Gauss) or above, the accuracy would be affected.
-
Page 5: Specifications
® ® IV. SPECIFICATIONS : V. PRODUCT USE : 1. Definition : 1. General Specifications : Zeroing Plate Standard Coating Plate Operating Temperature : 0°C~50 C (32 F to 122 F) at < 75% RH ° ° ° Storage Temperature : -20°C~60°C (-4°F to 140°F) at < 80% RH Standard Thickness : 39.6 mils (with battery removed) - Page 6 ® ® 3. Buttons : 4. The Display : > 2S MENU ZERO BASE>2S mils MAX - MIN 8888 . Buttons Function Press the button to enter MENU/ selecting. MENU > 2S Press the button to reverse the display. Symbol Meaning Press the button for 2 seconds to turn on or off backlight.
-
Page 7: Measurements
® ® VI. MEASUREMENTS : 2. Menu : In measuring mode, press button to enter menus, will blink. MENU 1. Auto Power Off (APO) : Leave the gauge without operation for 30 seconds, power turns off With button to select the function, browse the menus : automatically. - Page 8 ® ® Two Point Calibration : Press the tip of the Gauge to contact coated During two point calibration, the foil and standard coating surface tightly (Standard coating plate 1006 m or plate 1006 m can be replaced by uncoated substrate and a push standard coating plate), wait for one “Beep”...
- Page 9 ® ® A. Recalling previous records : Alarm Setting : To exit this mode, press button. Press MENU button to browse previous records, its sequence as follows : In this mode, press button to enter the “Hi MENU Limits” alarm setting mode. (Maximum reading) (Minimum reading) MAX-MIN...
- Page 10 ® ® Unit Selecting : Press button to turn on or off the “Lo In this mode, press button to enter to unit Limits” alarm. MENU selecting. After it’s selected, press button to enter the MENU “Lo Limits value” setting. Press button to select the m or mils.
-
Page 11: Maintenance
® ® Calibrating Point Clearance : VII. MAINTENANCE : Installing and Replacing Battery : ZERO In measuring mode, press button over BASE>2S 2 seconds to clear Calibrating Point. LCD will 0000 display “0000”. When calibration is not operated properly, the clearance function helps users to start it again. -
Page 12: Test Certificate
® WARRANTY MUMBAI Each “KUSAM-MECO” product is warranted to be free from defects in TEST CERTIFICATE material and workmanship under normal use & service. The warranty period is one year (12 months) and begins from the date of despatch of goods.
Need help?
Do you have a question about the KM 117A and is the answer not in the manual?
Questions and answers