Kusam-meco KM-2006 Operation Manual

Kusam-meco KM-2006 Operation Manual

Ac/dc trms leakage clamp milliamp meter

Advertisement

Quick Links

An ISO 9001:2008 Company
FEATURES :
0.1 mA Current Resolution.
True RMS Measurement for all applications.
— LED
Backlight function.
MAX MIN measurement function.
Data Hold function &
Zero function.
CAT IV 300V.
Auto Power Off.
Autoranging.
GENERAL SPECIFICATIONS :
Display : 4 Digit 5000 counts liquid crystal LCD display.
Jaw size : 23mm.
Sampling rate : 2 times/sec.
Operating Temperature & Humidity : 0 ~ 40°C (32 ~ 104°F); < 80% RH.
Storage Temperature & Humidity : -10 ~ 60°C (14 ~ 140°F); < 80% RH.
Low battery indication.
Continuity < 100W.
Auto power off 30 minute.
Power Supply : 1.5V AAA battery x 2.
Dimension : 206(L) x 76(W) x 33.5(H)mm
Weight : Approx. 270g.
Accessories : Test lead, User manual, Batteries & Carrying case.
DC CURRENT
Range
Resolution
300.0 mA
0.1 mA
3000 mA
1 mA
10.00 A
0.01 A
DC VOLTAGE
Range
Resolution
50 V
0.01 V
300 V
0.1 V
AC VOLTAGE
Range
Resolution
50 V
0.01 V
300 V
0.1 V
®
An ISO 9001:2008 Company
Chhaya com/D/chhaya/my documents/chhaya/backup/catlog/New catlog/2015 new arrival catalogs/KM 2006.cdr
ELECTRICAL SPECIFICATIONS :
AC CURRENT
Accuracy
Range
300.0 mA
± (1%rdg + 10dgts)
3000 mA
20.00 A
Accuracy
OHM
± (1%rdg + 2dgts)
Range
500 W
5
50 KW
Accuracy
500 KW
± (1%rdg + 5dgts)
G-17, Bharat Industrial Estate, T. J. Road, Sewree (W), Mumbai - 400 015. INDIA.
Sales Direct.: 022-24156638,
Email : kusam_meco@vsnl.net,
AC/DC TRMS LEAKAGE
CLAMPMETER
Accuracy
Resolution
0.1 mA
± (1%rdg + 5dgts)
1 mA
0.01 A
Accuracy
Resolution
0.1 W
KW
1
W
± (1%rdg + 2dgts)
10
W
100 W
All Specifications are subject to change without prior notice.
Tel. : 022-24124540, 24181649,
Model KM 2006
Preliminary Data
Fax : 022-24149659
Website : www.kusamelectrical.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the KM-2006 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Kusam-meco KM-2006

  • Page 1 AC/DC TRMS LEAKAGE CLAMPMETER An ISO 9001:2008 Company FEATURES : Model KM 2006 — 0.1 mA Current Resolution. — True RMS Measurement for all applications. — LED Backlight function. — MAX MIN measurement function. — Data Hold function & Zero function. —...
  • Page 2 AC Clamp Adaptor MILLIAMP CLAMP AC/DC Current Adaptor Transistorised Electronic Analog & Digital METER Insulation Resistance Testers Digital Sound Level Meter & Sound Level KM-2006 Calibrator Digital contact & Non-contact Type Tachometer Digital Non-contact (infrared) Thermometer Thermo Hygrometer Thermo Anemometer...
  • Page 3 WARRANTY MILLIAMP CLAMP METER KM 2006...
  • Page 4: Table Of Contents

    Table of Contents SAFETY INFORMATION Do not operate the tester if the body of meter or the Title Page test lead look broken. 1. SAFETY INFORMATION........1 Check the main function dial and make sure it is at 2. GENERAL SPECIFICATION......1 the correct position before each measurement.
  • Page 5: Electrical Specification

    Low Battery Indication : When the battery is under 3-2 Alternating Voltage (True RMS) the proper operation range, will appear on the Range Resolution Accuracy(40~1KHz) LCD display. 50V / 300V 0.01V/0.1V 1.2% ± 5dgts Sample Rate : 2 times/sec for digital data. Input impedance: 1 MW Power Source: 1.5V size AAA battery X 2 Typical battery Life: (without buzzer, backlight)
  • Page 6: Description Of The Instrument

    4.DESCRIPTION OF THE INSTRUMENT 4-2 Description of Front And Rear 4-1 Description of The Display Auto power off indication Polarity indication Low battery indication Alternative source indication Direct source indication Current measurement indication 1. Current Sensing Clamp Voltage measurement indication 2.
  • Page 7: Button Instruction

    5. BUTTON INSTRUCTION 6. MEASURING INSTRUCTION 6-1 ACA Measurement : With the clamp disconnected 5-1. HOLD Function from any conductor, switch the function selector to It is possible to freeze the value displayed by pressing A range. on the “HOLD” button. Open the clamp by pressing the jaw-opening handle Press the “HOLD”...
  • Page 8: Dca Measurement

    6.2 DCA Measurement : Switch the main function selector to V range. Connect red test lead to “+” terminal and black one to With the clamp disconnected from any conductor, the “COM” terminal. — switch the function selector to A range. Measure the voltage by touch the test lead tips to the Press “ZERO”...
  • Page 9: Resistance Measurement

    6-6 Resistance Measurement Switch the main function to W range. Connect red test lead to “+” terminal and black one to the “COM” terminal. Connect tip of the test leads to the point where the value of the resistance is needed. Read the result from the LCD panel.
  • Page 10: Maintenance

    • Repairs or servicing not covered in this manual should be performed only by qualified personal. ISO 9001 KUSAM-MECO 8-2 CLEANING : REGISTERED Periodically wipe the case with a dry cloth. Do not PASS...

Table of Contents