AXIOMTEK AX93274 Quick Installation Manual page 2

Assembly Drawing
AX93274 is suggested to be assembled with Pico-ITX PICOxx1 series.
2 94193274010E
©
Copyright 2014 Axiomtek Co., Ltd.
Version A1 July 2014
Printed in Taiwan
Quick Start
The procedures required to power on PICOXX1 with AX93274
installed:
Require a PSE which complies with IEEE802.3at standard.
(1)
Connect Ethernet Connector CN1 & DC Power out connector CN2/3
(2)
to PICOXX1 series via cables.
The choice between CN2 and CN3 depends on the power
input of PICOxx1 series.
Note: there are 80% efficiency for 12V-DC-In PICOxx1 series
while 70% efficiency for 5V-DC-in PICOxx1 series.
Following assembly drawing, Install heatsink, heatspreader,
(3)
thermal module and AX93274 I/O board to PICOXX1 series.
Firmly insert the Internet cable to connect LAN1 on AX93274
(4)
and PSE. Then power on PSE to start PICOxx1 series.
94193274010E
©
Copyright 2014 Axiomtek Co., Ltd.
Version A1 July 2014
Printed in Taiwan
3