01_General Safety Warnings; 02_Getting Started; 03_Heart-Rate Monitor; 04_Cadence Sensor - eLine DIGITAL SMART B+ Instructions Manual

EN
Thank you for the purchase of Digital Smart B+ hometrainer!

01_GENERAL SAFETY WARNINGS

Before using your trainer, carefully read the warnings listed
below for your health and safety.
1. The appliance is not to be used by persons (including
children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless
they have been given supervision or instruction.
2. Children being supervised not to play with the appliance.
3. Before beginning a training programme, undergo a
physical examination certifying good health.
4. Choose a training level compatible with your physical
endurance and the status of your health.
5. When using the trainer, select a training program and
adjust it so that it is compatible with your fitness level and
health.
6. If you feel particularly fatigued or sore while exercising,
stop using the trainer immediately and consult your doctor.
The above warnings are general and not exhaustive of all
the precautions that should be taken for the proper and
safe use of the trainer; which is solely the responsibility
of the user.

02_GETTING STARTED

Digital Smart B+ is an electronic unit designed for indoor
cycling training & testing that connects to a PC (Windows)
or a mobile app for devices such as smartphones or
tablets.
The integrated ANT+ and Bluetooth Smart protocols
interact wirelessly with PCs and mobile devices, with no
additional components necessary for Digital Smart B+
compatibility with most devices.
Digital Smart B+ is compatible with ELITE's My E-Training
app; the app's many features work with iOS (iPhone, iPad,
iPod Touch) and Android devices.
Digital Smart B+ supports ANT+ FE-C, an interactive pro-
tocol developed for hometrainers to read speed and
cadence data and to adjust resistance. Other protocols
allow only one-way data transfer and no interaction with
the hometrainer.
Moreover, the ANT+ FE-C protocol is "open" - it allows the
hometrainer to run all the software that supports it, so you
can freely choose the software to use with the Digital
Smart B+.
A complete list of devices featuring the ANT+ FE-C proto-
col is available at (http://www.thisisant.com/directory/).
Note: Not all computers/devices have integrated ANT+
connectivity and some may require an additional compo-
nent.
Many newer phones and tablets already feature the
14
Bluetooth Smart Ready connection and/or the ANT con-
nection and do not require additional components: if your
smartphone / tablet / cycle computer features integrated
ANT+ connectivity it will be utilized, otherwise some
models can communicate with external USB dongles for a
direct connection or via adapters.
Here's a list of compatible devices:
iPad 3 or newer
iPhone 4S or newer
iPod Touch 5th gen or newer
Android 4.3 and Bluetooth 4.0 devices
Please refer to the instructions included with your device
for a detailed explanation of its features.
Your device's compatibility can be tested at http://configu-
ro.elite-it.com, which also includes a list of required addi-
tional devices (should one be needed).

03_HEART-RATE MONITOR*

Digital Smart B+ has no receiver for heart rate monitors to
chest-belts.
It is possible to use a heart rate monitor, but it must be
compatible with the device and the app/software that
displays data. Please check your heart rate monitor and
smartphone/tablet/cycle computer info.
Please verify the features of your heart rate monitor and
the smartphone/tablet/cycle computer for more info about
compatibility.
* Heart rate monitor not included.

04_CADENCE SENSOR*

Digital Smart B+ hometrainer also features an advanced
cadence-measuring system that requires no sensors on
your bicycle.
This is possible thanks to a sophisticated calculation based
on the speed. Since this is not a direct measurement, but
the result of a calculation, in particular situations the
cadence value may not be accurate.
If a more precise measurement is required, an optional
cadence sensor can be connected to the roller. Contact
Elite srl (real@elite-it.com) for further information.
* Cadence sensor not included.

05_READING CADENCE DATA FROM

AN EXTERNAL NON-ELITE SENSOR

Should you decide to install an ELITE external cadence
sensor, you must:
- Follow the instructions found in the sensor package to
connect sensor and magnet to the bicycle;
-Connect the sensor's jack plug to the unit;