Vicon Roughneck V2000D-PTZ Quick Manual
  1. Manuals
  2. Brands
  3. Vicon Manuals
  4. Security Camera
  5. Roughneck V2000D-PTZ
  6. Quick manual

Vicon Roughneck V2000D-PTZ Quick Manual

Outdoor vandal ptz dome camera
Hide thumbs Also See for Roughneck V2000D-PTZ:
Table of Contents

Advertisement

Quick Links

Download this manual
Quick Guide
Roughneck V2000D-PTZ
Outdoor Vandal PTZ Dome Camera
XX320-20-01
Cybersecurity Notification:
accessing the device. To that end, these network cameras do not have a default password. A user defined
password with minimum password strength requirements must be set to access the device. See page 14 of
this Quick Guide for set-up instructions.
Vicon Industries Inc. does not warrant that the functions contained in this equipment will
meet your requirements or that the operation will be entirely error free or perform precisely as
described in the documentation. This system has not been designed to be used in
life-critical situations and must not be used for this purpose.
Document Number: 8009-8320-20-01 Product specifications subject to change without notice.
Issued: 2/2021 Copyright © 2021 Vicon Industries Inc. All rights reserved.
All network connected devices should use best practices for
Vicon Industries Inc.
Tel: 631-952-2288) Fax: 631-951-2288
Toll Free: 800-645-9116
24-Hour Technical Support: 800-34-VICON
UK: 44/(0) 1489-566300
www.vicon-security.com
(800-348-4266)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Roughneck V2000D-PTZ and is the answer not in the manual?

Questions and answers

Related Manuals for Vicon Roughneck V2000D-PTZ

Summary of Contents for Vicon Roughneck V2000D-PTZ

  • Page 1 Vicon Industries Inc. Tel: 631-952-2288) Fax: 631-951-2288 Vicon Industries Inc. does not warrant that the functions contained in this equipment will Toll Free: 800-645-9116 meet your requirements or that the operation will be entirely error free or perform precisely as 24-Hour Technical Support: 800-34-VICON described in the documentation.

  • Page 2: Table Of Contents

    V2002D-PTZ | Quick Guide Table of Content Product Overview Physical Characteristics Installation and Mounting Package Content Installation 2.2.1 Checking Appearance 2.2.2 Inserting or Removing the SD Card 2.2.3 Installing the Camera with Wall Mount 2.2.4 Connecting the Cables Connection Network Topology System Requirements Connecting Process 3.3.1...
  • Page 3 V2002D-PTZ | Quick Guide WARNING ⚫ This camera operates at 24 VAC/ 48 VDC / PoE (IEEE 802.3bt Class 6). ⚫ Installation and service should be performed only by qualified and experienced technicians and comply with all local codes and rules to maintain your warranty. ⚫...
  • Page 4 V2002D-PTZ | Quick Guide FCC Compliance Statement Information to the user: This unit has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

  • Page 5: Product Overview

    V2002D-PTZ | Quick Guide 1 Product Overview 1.1 Physical Characteristics Figure 1 - 1: Physical Dimensions Unit: mm (in.)
  • Page 6 V2002D-PTZ | Quick Guide Figure 1 - 2: Parts Pictorial Index Description Camera 1-1/2” NPT pendant adapter Screws (x2) to open and lock camera top cover Camera top cover Camera lens Camera head Table 1 - 1: Parts Pictorial Index Description Definition...
  • Page 7 V2002D-PTZ | Quick Guide Figure 1 - 3: Internal Interface Pictorial Index Name Description Booting: Fast flashing green LED indicates the camera is currently booting. Software updating: Alternating fast/slow flashing green LED Activity indicates the camera is updating software. Booting failure: A slower flashing green LED indicates the camera Behaviors failed to boot.
  • Page 8 V2002D-PTZ | Quick Guide DI/DO (Digital Input/Output) ports are equipped for external devices, e.g., smoke detector, siren, microphone. • Alarm In: Via “GND” and “Alarm In” ports, connect to external device that can trigger alarm input signals. • Alarm Out: Via “COM” and “Alarm Out” ports, connect to external device to be triggered through alarm DI/DO Port output signals.

  • Page 9: Installation And Mounting

    2 Installation and Mounting Package Content Check if all items listed below are included in the packing box. ⚫ IR PTZ Speed Dome * 1 ⚫ Adapter Ring * 1 ⚫ T20 torx wrench * 1 ⚫ T6 torx wrench * 1 T20 Stop Screw * 3 ⚫...

  • Page 10: Inserting Or Removing The Sd Card

    V2002D-PTZ | Quick Guide 2.2.2 Inserting or Removing the SD Card Remove the two screws (1) located on the micro SD card cover. Carefully pull open the micro SD card cover and insert or remove the micro SD card into or from the camera.
  • Page 11 V2002D-PTZ | Quick Guide Let the cables pass through the rubber sealing ring, and then mount the sealing ring on IR speed dome. Then mount the IR PTZ speed dome camera on the pendant adapter. Sealing Ring Figure 2 - 3: Mounting The Camera Fasten the 3 T20 stop screws with the T20 torx wrench.

  • Page 12: Connecting The Cables

    V2002D-PTZ | Quick Guide 2.2.4 Connecting the Cables Loosen the 2 T20 screws on top cover with the T20 torx wrench and then carefully allow the camera body shift downward. Figure 2 - 5: Loosening the 2 T20 Screws on Top Cover With the camera body shifted downward, the I/O interfaces will be seen on the back of the camera module.
  • Page 13 V2002D-PTZ | Quick Guide Figure 2 - 6: Connecting the Cables After connecting the cables, shift the camera body upward and then tighten the 2 T20 screws on top cover with T20 torx wrench to complete the installation of the camera with wall mount. Figure 2 - 7: Completing the Camera Installation...

  • Page 14: Connection

    V2002D-PTZ | Quick Guide 3 Connection Network Topology The camera, which is equipped with Ethernet RJ-45 network interface, can deliver live view image in real time via both Internet and Intranet manners. Please refer to the skeleton drawings shown below for understanding. Figure 3 - 1: Network Topology System Requirements The table below lists the minimum requirements to implement and operate the camera.

  • Page 15: Connecting Process

    V2002D-PTZ | Quick Guide Connecting Process 3.3.1 Default IP address Since this is a network-based camera, an IP address must be assigned. The camera’s default IP address is obtained automatically through a DHCP server in your network; be sure to enable DHCP in "Network Settings."...
  • Page 16 V2002D-PTZ | Quick Guide Viewing Preparation Images of the unit can be viewed through various browsers. Before viewing, follow these steps to enable the display. Enable Cookies as instructions below  In Internet Explorer, click Internet Options on the Tools menu. ...
  • Page 17 V2002D-PTZ | Quick Guide  Scroll down to the ActiveX controls and plug-ins radio buttons and set as follows: 【Download signed ActiveX controls】➔ Prompt (recommended) 【Download unsigned ActiveX controls】➔ Prompt 【Initialize and script ActiveX not marked as safe for scripting】➔ Prompt Figure 3 - 4: Security Settings 2/4 【Automatic prompting for ActiveX controls】➔...
  • Page 18 V2002D-PTZ | Quick Guide 【Run ActiveX controls and plug-ins】➔ Enable 【Script ActiveX controls marked safe for scripting*】➔ Enable Figure 3 - 6: Security Settings 4/4  Press OK to save the settings.  Close all the browser windows and restart the browser. This will allow the new settings taking effect. ...

  • Page 19: Ip Toolbox

    Please note that IP Toolbox works only in Microsoft Windows XP, Microsoft Windows Vista, and Microsoft Windows 7 or above. Steps to get the utility program running are listed below. Download the IP Toolbox’s folder to local computer. The latest IP Toolbox can be found on Vicon’s website Camera Software Download page, vicon-security.com.
  • Page 20 V2002D-PTZ | Quick Guide The “Filter” button on the upper-right corner allows user to perform filtering search, which means you can input certain keywords into the field nearby and also narrow down the range by selecting the criteria from the dropdown menu for a target search on cameras connected. Press “Auto Set IP Address”...
  • Page 21 V2002D-PTZ | Quick Guide 10. Click “FW Upgrade” button to upgrade the firmware of selected camera. A pop up window like the image below will show up. Figure 3 - 9: IP Toolbox Fw Upgrade Follow the steps below to complete firmware upgrade: ▪...

Table of Contents