Operation; Follow The Rules Regarding Operating Hours - XCMG XE17U Instruction Manual

5 Operation

Operating Rules - Operating Instructions for new machines and machine scope
Notice
Altitude:
Ambient Temperature:
Job Object:
Soil conditions
Working environnement:
– All excavators must be inspected and adjusted before delivery by the manufacturer
or his authorised representative.
– The following steps must be followed during initial start-up process and/or the
running-in period.
– Ignoring them may damage the machines or produce other negative impacts on
their performance.
5.1

Follow the rules regarding operating hours

Time
First 50h
After 50h
Caution! Advice for a safe running-in period
–
 It will affect the lifetime and safe operation of the machine, eventually leading to
accidents!
–
–
–
–
–
During operation, keep watching over proper function of the machine.
–
–
–
Notice
09.2020
Maintain 60%-70% of full load (engine speed: 60%-70% of rated speed)
Avoid working at full load within the running-in period (first 50h of service)
Check the coolant, fuel, engine oil and hydraulic oil every day for leakage.
Check the lubricating liquids every day and refill them if needed.
During operation, always observe the information and indicatiors given on the
display and the various meters.
Avoid engine overload.
Keep below 80% of the maximum load until the engine and other components
have reached the standard working temperature.
Check for looseness, wear or damage caused during delivery.
Check the wires and terminals for looseness, the meters for abnormal values,
and the battery's electrolytes for concentration.
Check the lubricating liquids and filter elements for contamination, dirt or
damages.
– When changing the lubricant or grease, refer to the "Maintenance" section of
this instruction for use.
below 2000m above sea level
-15 to +40
3 or less grade soil level and loose materials
Ideally solid and flat. slopes up to 15° upwards are ok
Non-swampy
Load
Full load
Seite 86 / 197