XCMG XE17U Instruction Manual page 59

Notice
09.2020
Special cases for Knapper Operation
– During operation, the rip end should not be reached.
– Keep a distance of about 5 cm instead.
– Press the drill rod with additional force to avoid void striking if
needed
– Do not swing the rod while it pierces the rock.
– Do not rotate the cabin while crushing rocks.
– When striking, do not move the drill rod around.
– Do not strike horizontally or upward.
– When making contact with the ground, make sure to keep the drill
rod vertical to it.
– When lifting the machine, do not extend the bucket cylinder to the
maximum.
Seite 49 / 197