Risks While Working Underwater - XCMG XE17U Instruction Manual

– Avoid lifting the equipment while driving downhill a slope.
Danger!
– Do not drive across slopes.
– Take extra care when swinging upper structure on a slope.
– Make sure enough space is available to stop the swing process.
– Make sure that all interchangeable equipment has been authorized by the
manufacturer and is installed properly.

Risks while working underwater

Warning!
09.2020
– When working in tunnels or buildings, ensure enough
space at top and well ventilation.
– Do not use the bucket as a hammer or pile driver.
– Do not use the bucket to compact when the bucket
cylinder extends completely (bucket is completely
retracted); otherwise, the bucket and other equipment will
be damaged.
– When digging, do not allow crawlers to lift off ground;
this will cause damage to mechanical and structural parts
– Do not operate the travel lever rapidly in high-speed
travel position.
– Avoid sudden start.
– Before backing up, you must stop the actions in forward
direction completely first.
– When you operate the travel lever back and forth, prevent
the excavator from receiving shocks.
– Avoid sudden braking, - operate softly with care.
– When you operate a lengthened or heavy-duty front
device, pay attention to balance among facilities.
Observe the operating rules for these attachments.
 The swing of a long and heavy equipment will increase slippage of the
excavator additionally.
Follow the safety advice and rules
Seite 115 / 197