Special Maintenance Conditions; Maintenance Of Engine - XCMG XE17U Instruction Manual

6.18

Special Maintenance Conditions

Operating
Maintenance cautions
conditions
Pre-operation: check if the screw plug and all the drain plugs are tightened.
Mud field, rainy
After-operation: clean the machine, and check if there are broken, damaged, loose
or snowy
or missing nut and bolt, and lubricate all the required parts immediately.
Pre-operation: check if the screw plug and all the drain plugs are tightened.
Seaside
After-operation: clean the machine thoroughly with clean water to remove the salt
content, and maintain the electric appliances frequently to avoid their corrosion.
Air filter: clean the filter elements at regular service intervals.
Radiator: clean the mesh enclosure of oil cooler to avoid the blockage of radiator
core.
Dusty air
Fuel system: clean the filter elements and sieve at regular short service intervals.
Electric appliances: clean them at regular intervals, especially the terminals of AC
generator and starting motor.
Fuel: adopt the appropriate low-temperature high-quality fuel.
Lubricant: adopt the high-quality low-viscosity hydraulic oil and engine oil.
Engine coolant: be sure to adopt the anti-freezing agent.
Frosty weather
Battery: charge the battery up at short regular intervals. In case of not charging the
battery up, the electrolyte may be frozen.
Track: keep the track clean, and park the machine on the hard ground to avoid
freezing the track on the ground.
Track: careful operation. Check if there are broken, damaged or missing bolts and
nuts frequently, and loosen the track a little looser than usual.
Stony ground
Equipment: in case of digging the stony ground, the standard accessories may be
damaged, adopt the front reinforced bucket or heavy-duty bucket.
Cab: if necessary, install the cab roof support to avoid the damages of falling rocks
Falling rocks
to the machine.
6.19

Maintenance of Engine

Notice!
09.2020
See "Operating Instructions of Engine" in details
Seite 169 / 197