Cleaning The Inside Of The Scanner - Panasonic KV-S1037X Operating Manual

9.2 Cleaning the Inside of the Scanner

9.2 Cleaning the Inside of the Scanner
Prepare the following cleaning supplies.
Soft and dry cloth
(one that does not easily
generate fibrous dust)
Thin cotton swab
Roller cleaning paper (KV-SS03)
Note
•
Clean the unit at least once a week or when 2,000 sheets have been scanned, whichever comes first.
•
Clean the rollers and sensors if paper jamming or double feeding occurs frequently.
•
If double feed detection does not function properly, clean the double feed detectors.
•
Clean the scanning glasses and reference area when black or white lines appear on the scanned
images.
•
Be careful not to damage any parts of the unit.
•
Do not use flammable aerosol cleaners.
•
Do not use commercially available cleaners, detergent, thinner, or benzine. (Doing so may cause
deformation, discoloration or damage.)
1.
Turn OFF the unit's power (page 28).
2.
Open the ADF door (page 31).
3.
Clean the scanning glasses, reference area, double feed detectors and rollers.
For details about cleaning, refer to the following sections:
•
"9.2.1 Cleaning the scanning glasses and reference area" (page 77)
•
"9.2.2 Cleaning the Double Feed Detectors" (page 77)
•
"9.2.3 Cleaning the Rollers" (page 78)
4.
Close the ADF door (page 31).
Notice
•
If roller cleaning notifications via the After Clean Roller Counter are enabled, clear After Clean Roller
Counter to 0 in Configuration Web (page 67) or User Utility.
For details about User Utility, refer to the User Utility help.
76
Used to clean the scanning glasses and reference area.
Used to clean the double feed detectors.
Recommended for use in cleaning the rollers. If you do not have the
roller cleaning paper, use a soft cloth with a small amount of
isopropyl alcohol or water.