Cleaning the Inside of the Scanner
Note
•
Clean the inside of the scanner when approximately 6,000 sheets have been scanned. The time for
cleaning may differ depending on documents you scan. To maintain proper scanning, clean the scanner
parts frequently.
•
Clean the rollers if paper jamming or double feeding occurs frequently.
•
If double feed detection does not function properly, clean the double feed detectors.
•
Clean the scanning glasses when vertical streaks appear on the scanned images.
•
Be careful not to damage any parts of the unit.
1.
Prepare the following cleaning supplies.
Soft and dry cloth
Thin cotton swab
Roller cleaning paper (KV-SS03)
2.
Press the ADF door release (A), and open the ADF door (B).
2
Used to clean the conveyor and scanning glasses.
Used to clean the double feed detectors and the starting
sensors.
Used to clean the rollers. Use of the roller cleaning paper is
recommended. If you do not have the roller cleaning paper, use
a soft cloth with a small amount of isopropyl alcohol or water.
Do not use commercially available cleaners, detergent,
thinner, or benzine. (Doing so may cause deformation,
discoloration or damage.)
1
Care and Maintenance
Operating Manual
51