Panasonic KV-S1037X Operating Manual page 67

Counter
Item
Scan
System
After Clean Roller Counter
After Replace Roller Counter
Clean Roller Timing
Replace Roller Timing
Date & Time
Item
Date and time setting
Date
Time
Time Zone
Maintenance
You can enter the Cleaning Mode (page 81).
The number of documents scanned during the scanning process.
This counter is cleared each time you start scanning.
The number of documents scanned by the scanner since it was
shipped from the factory.
The number of documents scanned since clearing the counter after
cleaning the rollers. Clear after cleaning the rollers.
The number of documents scanned since clearing the counter after
replacing the rollers. Clear after replacing the rollers.
You can change the number of documents scanned before the Roller
Cleaning Notification occurs, if necessary.
You can change the number of documents scanned before the Roller
Replacement Notification occurs, if necessary.
If "Use the PC clock." is selected, the scanner will get the date and
time from the computer when you click [Submit].
After you click [Submit], the check box is cleared automatically.
Select a value from the list.
Select a value from the list.
Set your time zone.
Contents
Contents
7.3.2 Function tab
67