Panasonic KV-S1037X Operating Manual page 59

6.
Register the settings as needed, and then click [Submit].
If you select [Shared Folder] or [FTP] for "Output Method", you can test whether connection to the
server is possible with the current settings by clicking [Test].
Shared Folder
Item
Account
Folder Path
FTP
Item
FTP Server
Authentication
"FTP", "FTPS (Explicit)" and "SFTP" are supported. When sending data over FTP, there is a risk of leakage of account
*1
information, etc.
Refer to "10.5 SFTP Public Key Authentication" (page 93).
*2
Email
Item
Email
Email Subject is "<Host Name> : <Type Code> : <Sequence ID> <User defined subject>". When "Prefix Removal" is
*1
enabled, Email Subject is "<User defined subject>". In the case of an SMTP server test, error notification or scan
notification, the prefix is not removed from the E-mail subject, in order to clarify who the sender is.
7.
Click [Edit] of "Scan Settings".
Domain/Workgroup (up to 63 characters) / User (up to 20
characters) / Password (up to 31 characters)
Path (up to 255 characters)
Server Address (up to 63 characters) / Protocol
Passive Mode / Folder Path (up to 255 characters)
Method / User (up to 31 characters) / Password (up to 31
characters) / Key
*2
To (1) - To (5)
Subject / Comment (up to 15 characters)
6.4.5 Preparation of Preset Scan mode
Contents
Contents
/ Port Number /
*1
Contents
*1
59