Rexroth-Ce Settings - Application Settings; Rexroth Ce Settings - Data Server - Bosch Rexroth IndraControl VEP 4 Series Manual

98/139 Bosch Rexroth AG
Software
Obtain an IP address via DHCP
Specify an IP address
Rexroth-CE Settings – Application Settings
Rexroth CE Settings – Data Server
Automatic assignment of the network parameters via DHCP.
Manual configuration of the following network parameters.
● IP address: Manual input of the IP address of the device.
● Subnet mask: Manual input of the subnet mask.
● Gateway: Manual input of the gateway.
● DNS: Manual input of the Domain Name Server (DNS).
General Information
In the "Application Settings" tab the autostart of the visualization software or
control software that is installed on Windows CE can be set. The application
selected in this tab, is directly started after the Windows CE restart.
Fig.9-5: Rexroth CE Settings – "Application Settings"
Visualization
Components that can be selected under "Visualization" depend on the file
structure under StorageCard ▶ Rexroth ▶ Visu. All filed components there, are
displayed.
Control
Components that can be selected under "Control" depend on the file structure
under StorageCard ▶ Rexroth ▶ Controls. All filed components there, are dis‐
played.
General Information
In the "Data Server" tab the start of FTP and Telnet server can be set.
DOK-SUPPL*-VEP*XX.4***-PR03-EN-P
Rexroth IndraControl VEP **.4 Embedded Terminal