Commissioning With Windows Xp Embedded; Installation; General Information - Bosch Rexroth IndraControl VEP 4 Series Manual

106/139 Bosch Rexroth AG
Software
Device Connection
Run CEView on startup
License
9.3

Commissioning with Windows XP Embedded

9.3.1

Installation

General Information

Access data
Fig.9-19: Remote Agent – Setup
With the "Device Connection" options connection settings can be defined. The
TCP/IP connections or the serial interface can be selected. Infrared is not pos‐
sible. If a serial connection was selected, the baudrate and the use of the
"RTS" and "CTS" signals can be configured via the Advanced button.
Use the Run CEView on startup option to set whether the CEView program
shall be automatically started while starting the system.
Use the License button to license the product or to modify the license.
Users Start the security system with the Users button of the user management.
If the WinStudio Runtime modules were downloaded and all set‐
tings are made, the device has to be rebooted (by switching on and
switching off the voltage supply).
A new licensing procedure is used for WinStudio version 7.x and
higher versions. The licensing is not done anymore in the Remote
Agent, but in a separate tool that can be called via the start menu.
Please find further information about the new licensing procedure
in the "Rexroth IndraWorks HMI 10VRS" operating and program‐
ming instructions (parts number R911328776).
The following sections describe how to install IndraMotion MTX operation.
Administrator rights are required for system settings of the operat‐
ing system and for the installation of the user interface. A possibly
existing writing protection
Filter)" on page 116
(EWF).
Preinstalled IndraControl VEP **.4 delivered by the manufacturer feature the
following access data:
DOK-SUPPL*-VEP*XX.4***-PR03-EN-P
Rexroth IndraControl VEP **.4 Embedded Terminal
chapter 9.3.2 "EWF (Enhanced Write
is to be disabled by the Enhanced Write Filter