Application Settings; Fig. 9-5: Rexroth Ce Settings - Application Settings - Bosch Rexroth IndraControl VEH 30.1 Project Planning Manual

9-4
Software

Application Settings

In this tab the settings for autostart and the visualization connection to the
control are configured.
Fig. 9-5: Rexroth CE Settings – Application Settings
Visualization Data Source
• Ethernet: Ethernet connection to the control.
• Server IP: IP address of the control connected via Ethernet.
UDP Communication
• Control IP: IP address of the control to which the UDP telegrams are
to be sent.
• Send UDP real time telegram to control: Selection, if the data are to
be sent to the control (control IP) via UDP telegram.
The following data are sent to the control (control IP) via UDP telegram:
• Keyboard codes for IndraControl VEH 30.1
• Data of the additional elements for IndraControl VEH 30.1. For
example, handwheel, override, key switch.
IndraControl VEH 30.1
DOK-SUPPL*-VEH*30.1***-PR02-EN-P