Usb Support; Programs And Icons - Bosch Rexroth IndraControl VEP 4 Series Manual

DOK-SUPPL*-VEP*XX.4***-PR03-EN-P
Rexroth IndraControl VEP **.4 Embedded Terminal

USB Support

Programs and Icons

Fig.9-14: System properties – working memory
If the slider is moved to the left, more memory for executable programs is re‐
served. Therefore these programs can run with a better performance. If the
slider is moved to the right, more memory for data to write is reserved.
"Allocated" displays the value of the reserved memory in kilobytes. "In Use"
displays the currently used memory.
NOTICE
After the memory distribution has been modified, the registry has to be saved
via the "Save Registry" desktop icon!
Windows Embedded CE 6.0 is an embedded operating system with selected
devices and drivers. Therefore only specific USB devices enabled by Bosch
Rexroth can be operated with the IndraControl VEP **.4 devices. Other devices
that are not mentioned in the table below may work. However, Bosch Rexroth
does not assume any warranty for this.
Device class
USB keyboard
USB mouse
Fig.9-15: Enabled USB devices
Programs
The following programs can be called either directly via desktop icons or via the
start menu.
Program
Command prompt
Internet Explorer
Bosch Rexroth AG
Data loss due to not saved registry.
Description
Standard USB keyboards without internal USB stroke.
HP model no.: KU-0133
Logitech Internet Navigator Keyboard
Cherry G81-3000
IBM model: MO09BO
Cherry Mouse Model M-5000
Microsoft Basic Optical Mouse
Description
MS DOS prompt
Program to display websites
103/139
Software