14.2 Displaying weather data
If a DuoFern environmental sensor is being used on
site, it is possible to view the environmental sensor's
weather data on-screen.
i
In the event that multiple environmental sensors are in
being received, the desired environmental sensor can
be selected in menu 9.9.4 (see page 43).
Accessories, see page 86.
34
1.
Accessing the weather
data.
To do so, briefly press the
[ SET / Stop ] button.
Initially, the temperature
is displayed. An umbrella
appears additionally on the
display if the environmental
sensor detects rain.
2.
Pressing the plus or minus
button enables all of the
weather data to be ac-
cessed successively:
a)
Brightness in kilolux
[ klx ].
b)
Wind speed in metres
per second [ m/s ].
3.
Back to normal view.
The weather data display
closes after approx. 10
seconds if no buttons are
pressed.
EN
+ -