Menu 4 - Configuring The Automatic Solar Function [ ] And Sunshine Position - RADEMACHER RolloTron Comfort DuoFern Translation Of The Original Operating And Assembly Manual

16.4.1 Menu 4 - Configuring the automatic solar function [ ] and sunshine position

1.
Call up the main menu.
2.
Select and open
menu 4 [ ] Automatic
solar function.
3.
Activate and confirm the
automatic solar function.
On = automated solar
function on
OFF = automated solar
function off
Depending on solar mode
(see page 41)...
[ 1 ] Local light
sensor
[ 2 ] Local light sensor and
sunshine position
[3] Central sun shading
controller
60
+ -
+ -
...the following settings
are required:
Continue at
point 4
Continue at
points 4 and 5.
Continue at
point 5
4.
Customisation of the local
solar set limit.
ACTUAL [ IST ] value
Currently measured
brightness (e.g. 35).
22
" "= too dark
SET [ SOLL ] value
Configurable set limit
31 = minimal sun,
approx. 4000 Lux
45 = bright sunlight
approx. 40000 Lux
a) Return to main menu or
continue at point 5.
EN
+ -