Drawing In And Fastening The Belt - RADEMACHER RolloTron Comfort DuoFern Translation Of The Original Operating And Assembly Manual

i

10. Drawing in and fastening the belt

1.
Insert the mains plug into the socket.
There is a risk of injury from the reel.
Never reach into the reel compartment when the motor
is running.
2.
Press the Up button until the fastening hooks
are easily accessible in the reel compartment.
i
As no end points have been set yet, the drive will stop
as soon as you release the button.
3.
Always remove the mains plug from the socket.
4.
Next, draw-in the belt into the RolloTron Comfort DuoFern
from the top.
22
CAUTION!
EN