i
11. Mounting the RolloTron Comfort DuoFern
Mount the RolloTron Comfort DuoFern as straight as pos-
sible, so that the belt can wind correctly.
Ensure that the RolloTron Comfort DuoFern sits freely in
the belt box and that it is not in contact with the mason-
ry, otherwise noise will be generated during operation.
1.
Slide the RolloTron Comfort DuoFern into the belt box and
screw it tight using the screws provided.
A damaged connecting cable may cause a short
circuit.
Ensure that the connecting cable is laid correctly inside
the cable duct, otherwise it can be crushed and damaged
when the cover is screwed in place.
2.
Slide the enclosed cover plate over the lower mounting
holes.
3.
Re-insert the mains plug into the 230 V / 50 Hz socket.
24
WARNING!
WARNING!
EN