Removing The Rollotron Comfort Duofern; (E.g. In The Event Of A Move) - RADEMACHER RolloTron Comfort DuoFern Translation Of The Original Operating And Assembly Manual

i
19. Removing the RolloTron Comfort DuoFern (e.g. in the event of a move)
+
1.
+ + +
2.
Fully close the roller shutters.
3.
Keep the button held down.
4.
Pull out the belt as far as possible from the top of the
RolloTron Comfort DuoFern.
5.
Remove the cover plate from the lower mounting holes.
You can remove the front panel by gripping the small
notch in the lower side of the device.
6.
Remove the mains plug from the socket.
7.
Subsequently, release the fastening screws and pull the
RolloTron Comfort DuoFern completely out of the belt box.
-
Erase all settings.
Simultaneously press and hold
the buttons for 5 seconds.
EN
75