Page 1
° Instruction Manual We appreciate your purchase of a TAKEX passive infrared sensor. This sensor will provide long and dependable service when properly installed. Please read this Instruction Manual carefully for correct and effective use. : This sensor is designed to detect intrusion and to initiate an alarm ; it is not a burglary-preventing device.
Page 2
Install the sensor in a location Avoid direct sunlight, spot light ● Do not install in a site which ● ● Do not install the sensor outdoors where intruders are more likely to is subject to electrical noise or intense reflections on the sensor or ●...
Page 3
+ 120% 100% 80% 60% ー (Factory set) ② ③ ② ③ (5) Pulse count (PA-6812E / 6810E / 6805E) ① ④ ① ④ Switch 6, 7 ⑦ ⑦ ● Turn the Mode selector ① OFF (Factory set) When the switch is turned ON, the alarm LED lights at alarm.
Page 4
The specifications are subject to change without notice. TAKEX products are warranted to be free from defects in material and workmanship for 12 months from original date of shipment. Our warranty does not cover damage or failure caused by Acts of God (including inductive surge by lightning), abuse, misuse, abnormal usage, faulty installation, improper maintenance or any repairs other than those provided by TAKEX.