Cisco NCS1004 Manual page 6

Displaying the AINS Configuration
Transceiver Temperature : 32 Celsius
AINS Soak
AINS Timer
AINS remaining time
When the soak time expires, AINS state changes from Running to None. The Transport Admin State of optics
controller changes from Automatic In Service to In Service.
RP/0/RP0/CPU0:ios# show controllers optics 0/1/0/3
Thu Feb 21 20:02:34.126 UTC
Controller State: Up
Transport Admin State: In Service
Laser State: On
LED State: Green
Optics Status
Configuring Controllers
6
PID : QSFP-100G-CWDM4-S
VID : V02
CISCO-FINISAR
Date Code(yy/mm/dd) : 18/04/11
Fiber Connector Type: LC
Sonet Application Code: Not Set
Ethernet Compliance Code: 100GBASE-CWDM4
: Running
: 0h, 15m
: 771 seconds
Optics Type: Grey optics
Alarm Status:
-------------
Detected Alarms: None
LOS/LOL/Fault Status:
Alarm Statistics:
-------------
HIGH-RX-PWR = 0
HIGH-TX-PWR = 0
HIGH-LBC = 0
OOR-CD = 0
WVL-OOL = 0
IMPROPER-REM = 0
TX-POWER-PROV-MISMATCH = 0
Performance Monitoring: Enable
THRESHOLD VALUES
----------------
Parameter
------------------------
Rx Power Threshold(dBm)
Tx Power Threshold(dBm)
LBC Threshold(mA)
LOW-RX-PWR = 0
LOW-TX-PWR = 0
HIGH-DGD = 0
OSNR = 0
MEA = 0
High Alarm Low Alarm High Warning
---------- --------- ------------
4.9 -12.0
3.5 -10.1
N/A N/A
Configuring Controllers
Low Warning
-----------
0.0 0.0
0.0 0.0
0.00 0.00