Cisco NCS1004 Manual page 24

Link Layer Discovery Protocol (LLDP) Support on Management Interface
HundredGigECtrlr0/2/0/8
HundredGigECtrlr0/2/0/9
HundredGigECtrlr0/2/0/10
HundredGigECtrlr0/2/0/11
HundredGigECtrlr0/2/0/12
Location:
Slice ID:
Client Bitrate:
Trunk
Status:
LLDP Drop Enabled:
Client Port
HundredGigECtrlr0/3/0/2
HundredGigECtrlr0/3/0/3
HundredGigECtrlr0/3/0/4
Link Layer Discovery Protocol (LLDP) Support on Management
Interface
The LLDP support on management interface feature requires a system to form LLDP neighborship over the
system management interface, through which it advertises and learns LLDP neighbor information. This
information about neighbors used to learn about the neighbors and in turn the topology of the devices for
Operations, Administration, and Maintenance (OAM) purposes.
Advantages of LLDP
• Provides support on non-Cisco devices.
• Enables neighbor discovery between non-Cisco devices.
Limitation
• When you disable LLDP globally, the LLDP gets disabled on all the interfaces.
Note By default, LLDP is enabled for NCS 1004. But when you enable and disable LLDP in the global configuration
mode, LLDP gets disabled on all the interfaces.
Workaround: You must enable LLDP globally or reload the Router.
Cisco Discovery Protocol (CDP) vs LLDP
The CDP is a device discovery protocol that runs over Layer 2. Layer 2 is also known as the data link layer
that runs on all Cisco devices, such as routers, bridges, access servers, and switches. This protocol allows the
network management applications to automatically discover and learn about other Cisco devices that connect
to the network.
Configuring Controllers
24
0/3
0
100GE
Bitrate: 300G
Provisioned
TRUE
Traffic Split Percentage
ODU40/2/0/1/0
ODU40/2/0/1/1
ODU40/2/0/1/2
ODU40/2/0/1/3
ODU40/2/0/1/4
Mapper/Trunk Port
Traffic Split Percentage
ODU40/3/0/0/0
ODU40/3/0/0/1
ODU40/3/0/0/2
Configuring Controllers
100
100
100
100
100
CoherentDSP0/3/0/0
100
100
100