Raider RD-AG37 User Manual page 15

4.2. Do not use the angle grinder with a starting switch is damaged.
Angle grinder, which can not be excluded and included as intended by the manufacturer, is
dangerous and should be repaired.
4.3. Before you modify the settings of the angle grinder to replace work tools and additional
accessories as well as a long time when you will not use grinders, unplug the plug from the supply
network. This measure eliminates the danger of triggering the grinding inadvertently.
4.4. Keep grinding in places where they can be reached by children. Do not allow them to be used
by persons who are not familiar with how to work with them and have not read those instructions.
When you are in the hands of inexperienced users, grinders can be extremely dangerous.
4.5. Keep grinding their care. Check whether the mobile units operate impeccable, whether it
spells, if there is a broken or damaged item which distort or alter the functions of the grinding machine.
Before using the angle grinder, make sure that the damaged parts to be repaired. Many accidents are
caused by poorly maintained power tools and appliances.
4.6. Use the angle grinder, attachment, working tools according to the manufacturer's instructions.
In doing so must comply with specific operating conditions and operations to perform. Using grinders
of various applications provided by the manufacturer increases the risk of accidents.
5. Maintain.
5.1. Repairing your electric tools is best carried out only by qualified specialists in workshops
RAIDER, which used only original spare parts. Thus it ensuring their safe operation.
6. Guidelines for the safe handling, specific grinding purchased by you. General guidelines for safe
operation with a disc grinder and sandpaper, clean with wire brush and abrasive cutting disk.
6.1. This grinding can be used for grinding with carboflex drive and sandpaper, clean with wire
brush, polishing and cutting carboflex disk. Follow all instructions and warnings complying with
technical parameters and the adjusted images. Failure to follow the following instructions, the
consequences may be an electric shock, fire and / or severe injuries.
6.2. This angle grinder is not suitable for polishing. Carrying out activities for which the grinding is
not intended, may be dangerous and cause injuries.
6.3. Do not use additional devices which are not recommended by the manufacturer for this
particular power. The fact that you can attach to specified device or machine working tool does not
ensure safe working with him.
6.4. Allowable speed of rotation of the working tools must be at least equal to the inscribed plaque
on the grinding speed of rotation. Working tools that rotate at a higher speed than the maximum
indicated on the angle grinder can break and pieces of them high speed.
6.5. The outer diameter and thickness of the working tools must comply with the particulars
specified in the technical characteristics of your angle grinder. Working tools with inappropriate size
may not be shielded as necessary or can be controlled well enough.
6.6. Grinding discs, flanges exposed discs or other tools must be applied precisely to fit your shaft
grinding machine. Working tools that do not fit exactly to the grinding spindle, rotate unevenly vibrate
heavily and can lead to loss of control over the machine.
6.7. Do not use damaged work tools. Before each use inspect the working tools, for example
abrasive discs for cracks or dislodge undergoing discs for cracks or wear strong, wire brushes poorly
secured or broken staples. If you miss grinding tool or work, check them carefully for damage or use
undamaged new work tools. Once you have checked carefully and work tools are installed, allow
grinding to work at maximum speed for one minute. Stay and keep nearby people away from the
plane of rotation. The most commonly damaged work tools break during this test period.
6.8. Work with personal protective equipment. Depending on the application work with all
face mask, eye protection or goggles. If necessary, work with breathing mask, silencers (hearing
protectors), work shoes or special apron that protects you from work to dislodge small particles. Your
eyes must be protected from flying into the working area of particles. Dust mask or a breathing filter
dust arising from work. If you are exposed for long periods of loud noise, this can lead to hearing loss.
6.9. Beware others to be a safe distance from work area. Anyone who is in the work area must
wear personal protective equipment. Break off pieces of the work piece or work tool may result in a
strong acceleration to fly away and cause damage well beyond the working area.
6.10. If you perform activities which threaten to fall working tool of hidden wires under tension or
15