Table of Contents
Advertisement
Available languages
Available languages
Regulatory information
Hereby, iRobot Corporation declares that this robot vacuum
cleaner model RVE-Y1 is in compliance with the EU Radio
Equipment Directive 2014/53/EU. The full text of the EU
Declaration of Conformity is available at the following web
EN
address: www.irobot.com/compliance.
Hereby, iRobot Corporation declares that this robot vacuum
cleaner model RVE-Y1 is in compliance with the Radio
Equipment Regulations 2017. The full text of the UKCA
Declaration of Conformity is available at the following web
address: www.irobot.com/compliance.
Chemical information report listing SVHC (substances of very high concern)
per EU Regulation EU 1907/2006 can be found here:
www.irobot.com/compliance.
Regulatory Model RVE-Y1 incorporates the Sextant radio module model
AXG-Y1. The Sextant radio module is a dual band radio which operates
in the WLAN 2.4 GHz and WLAN 5GHz bands. The Sextant radio module
also incorporates Bluetooth and BLE which operates in the 2400 MHz –
2483.5 MHz band.
• The 2.4 GHz band is limited to operate between 2400 MHz –
2483.5 MHz with a maximum EIRP output power of 17.78 dBm
(59.98 mW) at 2442 MHz.
• The 5 GHz band is limited to operate between 5150 MHz – 5850 MHz
with a maximum EIRP output power of 20.81 dBm (120.50 mW)
at 5190 MHz.
• For Israel, the 5 GHz band is limited to operate in the 5150 MHz –
5350 MHz band.
12
For more information, visit global.irobot.com
This symbol on the product indicates that the appliance must
not be disposed of with unsorted common municipal waste. As
the end-user, it is your responsibility to dispose of the end-of-life
appliance in an environmentally sensitive manner as follows:
(1) returning it to the distributor/dealer from whom you
purchased the product; or
(2) depositing it in a designated collection point.
Disposing of this product correctly will help save valuable
resources and prevent any potential negative effects on human
health and the environment, which could otherwise arise
from inappropriate waste handling. Please contact your local
authority for further details or your nearest designated collection
point. Penalties may be applicable for incorrect disposal of
this waste in accordance with your national legislation. More
information may be found at the following source: http://
ec.europa.eu/environment/waste/weee/index_en.html
Manufacturer Address: iRobot Corporation, 8 Crosby Drive, Bedford MA
01730, USA
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Roomba j7+ and is the answer not in the manual?
Questions and answers
How put on vacation?
To set the iRobot Roomba j7+ to vacation mode, follow these steps:
1. Remove the robot from the charging station.
2. Hold down the clean button for 3 seconds while keeping one wheel off the ground.
3. All indicators will turn off, confirming that the battery is turned off.
This ensures the robot is powered down for storage or shipping.
This answer is automatically generated
My robot is missing spaces on the carpet, large areas. How can I reprogram to cover these areas.
You can manually guide your Roomba j7+ to cover missed areas using the "footsies" method. Start a cleaning run with room select and, when the robot approaches the missed area, use your feet to block it from leaving. Do not push or shove the robot; just create a barrier with your feet to guide it into the missing section. This method forces the Roomba to recognize and clean the previously missed area.
This answer is automatically generated
Doesn't recognise log in and doesn't communicate with my e-mail Wish it could be operated manually
The iRobot Roomba j7+ may not recognize the login and communicate with your email because it lacks a home button for automated password retrieval in Home Assistant. Unlike older models, the j7+ only has a clean button, which does not provide the same functionality. To operate it manually, you can try retrieving the password using third-party methods, such as the Roomba980-Python repository, or control it through the iRobot app. If manual retrieval does not work, you may need to check for alternative integration methods in Home Assistant.
This answer is automatically generated