iRobot Roomba j7+ Owner's Manual page 3

Robot vacuum
Hide thumbs Also See for Roomba j7+:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
WARNING: Indicates a hazardous situation that, if not avoided,
could result in serious injury or death.
CAUTION: Indicates a hazardous situation that, if not avoided,
could result in minor or moderate injury.
EN
NOTICE: Indicates a hazardous situation that, if not avoided,
could result in property damage.
GENERAL
WARNING
• Your robot comes with a region-approved power supply cord
and is designed to be plugged into a standard household AC
power outlet only. Do not use any other power supply cord. For
replacement cords, please contact Customer Care to ensure
proper selection of country-specific power supply cord.
• Do not open your robot or dirt disposal other than instructed in the
Owner's Guide. There are no user serviceable parts inside.
Refer servicing to qualified service personnel.
• Risk of electric shock, use indoors in dry location only.
• Do not handle your robot or dirt disposal with wet hands.
• Do not use unauthorised chargers. Use of an unauthorised
charger could cause the battery to generate heat, smoke,
catch fire or explode.
• Your robot is not a toy. Small children and pets should be
supervised when your robot is operating.
• Do not sit or stand on your robot or dirt disposal.
• Store and operate your robot in room-temperature environments
only.
• If the room to be cleaned contains a balcony, a physical barrier
should be used to prevent the robot access to the balcony and
ensure safe operation.
• Clean cliff sensors for buildup.
• If the room to be cleaned contains equipment, such as a stove,
fan, portable heater or humidifier, remove the equipment before
operation. There is a risk of injury, accident or malfunction if the
robot comes in contact with and pushes the equipment.
• This robot is intended for dry floor use only. Do not use this
device to clean up spills. Do not allow your robot or charging
station to become wet.
CAUTION
• Do not operate the robot in areas with exposed electrical
outlets in the floor.
• Do not use this device to pick up sharp objects, glass
or anything that is burning or smoking.
• Be aware that the robot moves on its own. Take care when
walking in the area that the robot is operating in to avoid
stepping on it.
• If the device passes over a power cord and drags it, there
is a chance an object could be pulled off a table or shelf.
Before using this device, pick up objects such as clothing,
loose papers, pull cords for blinds or curtains, power cords and
any fragile objects. Extinguish candles. Shut off portable heaters.
• Perform the required maintenance as per the Owner's Guide to
ensure safe operation of the robot and dirt disposal.
NOTICE
• Do not place anything on top of your robot.
• Failure to maintain cleanliness of charger contacts could
result in loss of ability for the robot to charge the battery.
• Before running your robot on carpets or rugs, ensure that
the carpets or rugs are compatible with vacuums using bars
or brushes. Using your robot on a carpet or rug that is not
compatible could result in damage to your carpet or rug.
Contact your carpet or rug manufacturer with questions on
compatibility.

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Roomba j7+ and is the answer not in the manual?

Questions and answers

Nancy JO Biddle
February 24, 2025

How put on vacation?

1 comments:
Mr. Anderson
February 24, 2025

To set the iRobot Roomba j7+ to vacation mode, follow these steps:

1. Remove the robot from the charging station.
2. Hold down the clean button for 3 seconds while keeping one wheel off the ground.
3. All indicators will turn off, confirming that the battery is turned off.

This ensures the robot is powered down for storage or shipping.

This answer is automatically generated

Gary
February 28, 2025

My robot is missing spaces on the carpet, large areas. How can I reprogram to cover these areas.

1 comments:
Mr. Anderson
February 28, 2025

You can manually guide your Roomba j7+ to cover missed areas using the "footsies" method. Start a cleaning run with room select and, when the robot approaches the missed area, use your feet to block it from leaving. Do not push or shove the robot; just create a barrier with your feet to guide it into the missing section. This method forces the Roomba to recognize and clean the previously missed area.

This answer is automatically generated

George Birse
March 1, 2025

Doesn't recognise log in and doesn't communicate with my e-mail Wish it could be operated manually

1 comments:
Mr. Anderson
March 1, 2025

The iRobot Roomba j7+ may not recognize the login and communicate with your email because it lacks a home button for automated password retrieval in Home Assistant. Unlike older models, the j7+ only has a clean button, which does not provide the same functionality. To operate it manually, you can try retrieving the password using third-party methods, such as the Roomba980-Python repository, or control it through the iRobot app. If manual retrieval does not work, you may need to check for alternative integration methods in Home Assistant.

This answer is automatically generated

This manual is also suitable for:

Rve-y1Adg-n2

Table of Contents

Save PDF