Vue Avant; Vue Arrière - iRobot Roomba j7+ Owner's Manual
Robot vacuum
Hide thumbs
Also See for Roomba j7+:
- User manual ,
- Owner's manual (73 pages) ,
- Owner's manual (32 pages)
Table of Contents
Advertisement
Available languages
Available languages
À propos du système d'autovidage Clean Base™
Vue avant
FR
Couvercle du
réservoir
Conduit
d'évacuation
Contacts de
chargement
Cages de
roues
Vue du dessus
Compartiment
de rangement
des sacs
Couvercle de
la soufflerie
2
Pour plus d'informations, consultez le site global.irobot.com
Vue arrière
Languette
Voyant lumineux
Cible visuelle de
retour à la base
Ouverture d'évacuation
des débris
Vue du dessous
Guide-rails
de sac
Tube d'évacuation
des débris
Capteur de présence
de sac
Rembobineur de
cordon
Tube d'évacuation
des débris
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Roomba j7+ and is the answer not in the manual?
Questions and answers
How put on vacation?
To set the iRobot Roomba j7+ to vacation mode, follow these steps:
1. Remove the robot from the charging station.
2. Hold down the clean button for 3 seconds while keeping one wheel off the ground.
3. All indicators will turn off, confirming that the battery is turned off.
This ensures the robot is powered down for storage or shipping.
This answer is automatically generated
My robot is missing spaces on the carpet, large areas. How can I reprogram to cover these areas.
You can manually guide your Roomba j7+ to cover missed areas using the "footsies" method. Start a cleaning run with room select and, when the robot approaches the missed area, use your feet to block it from leaving. Do not push or shove the robot; just create a barrier with your feet to guide it into the missing section. This method forces the Roomba to recognize and clean the previously missed area.
This answer is automatically generated
Doesn't recognise log in and doesn't communicate with my e-mail Wish it could be operated manually
The iRobot Roomba j7+ may not recognize the login and communicate with your email because it lacks a home button for automated password retrieval in Home Assistant. Unlike older models, the j7+ only has a clean button, which does not provide the same functionality. To operate it manually, you can try retrieving the password using third-party methods, such as the Roomba980-Python repository, or control it through the iRobot app. If manual retrieval does not work, you may need to check for alternative integration methods in Home Assistant.
This answer is automatically generated