iROBOT Roomba j7 - Robot Vacuum Manual

Safety information

Important safety instructions

This Owner's Guide includes information for regulatory model(s): RVE-Y1, ADI-N1
SAVE THESE INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USE

To reduce the risk of injury or damage, read and follow the safety precautions when setting up, using and maintaining your robot.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not play with the appliance.

	This is the safety alert symbol. It is used to alert you to potential physical injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
	Risk of electric shock
	Risk of fire
	Caution
	Class II equipment
	For indoor use only
	Class III equipment
	Rated power output, d.c.
	Rated power input, d.c.
	Rated power input, a.c.
	Read operator's manual
	Keep out of reach of children
	General symbol for recycling
	Separate Supply Unit

WARNING: Indicates a hazardous situation that, if not avoided, could result in serious injury or death.
CAUTION: Indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
NOTICE: Indicates a hazardous situation that, if not avoided, could result in property damage.

GENERAL

• Your robot comes with a region-approved power supply cord and is designed to be plugged into a standard household AC power socket only. Do not use any other power supply cord. For replacement cords, please contact Customer Care to ensure proper selection of country-specific power supply cord.
• Do not open your robot or charging station other than instructed in the Owner's Guide. There are no user serviceable parts inside. Refer servicing to qualified service personnel.
• Risk of electric shock, use indoors in dry location only.
• Do not handle your robot or charging station with wet hands.
• Do not use unauthorised chargers. Use of an unauthorised charger could cause the battery to generate heat, smoke, catch fire or explode.
• Your robot is not a toy. Small children and pets should be supervised when your robot is operating.
• Do not sit or stand on your robot or charging station.
• Store and operate your robot in room-temperature environments only.
• If the room to be cleaned contains a balcony, a physical barrier should be used to prevent the robot access to the balcony and ensure safe operation.
• Clean cliff sensors for build-up.
• If the room to be cleaned contains equipment, such as a stove, fan, portable heater or humidifier, remove the equipment before operation. There is a risk of injury, accident or malfunction if the robot comes in contact with and pushes the equipment.
• This robot is intended for dry floor use only. Do not use this device to clean up spills. Do not allow your robot or charging station to become wet.

• Do not operate the robot in areas with exposed electrical sockets in the floor.
• Do not use this device to pick up sharp objects, glass or anything that is burning or smoking.
• Be aware that the robot moves on its own. Take care when walking in the area that the robot is operating in to avoid stepping on it or tripping over it.
• If the device passes over a power cord and drags it, there is a chance an object could be pulled off a table or shelf. Before using this device, pick up objects like clothing, loose papers, pull cords for blinds or curtains, power cords and any fragile objects. Extinguish candles. Turn off portable heaters.
• Perform the required maintenance as per the Owner's Guide to ensure safe operation of the robot and charging station.
• If the robot is operating on a floor with stairs, please remove any clutter from the top step.

NOTICE
• Do not place anything on top of your robot or charging station.
• Failure to maintain cleanliness of charger contacts could result in loss of ability for the robot to charge the battery.
• Before running your robot on hard floors, please test your robot on a small section of the hard floor to ensure that it is compatible. Using your robot on a hard floor that is not compatible could result in damage to your floor. Contact your hard floor manufacturer with questions on compatibility.
• Before running your robot on carpets or rugs, ensure that the carpets or rugs are compatible with the dual multi-surface rubber brushes on your robot, otherwise known as beater bars. Using your robot on a carpet or rug that is not compatible could result in damage to your carpet or rug. Contact your carpet or rug manufacturer with questions on compatibility.

CHARGING STATION

• If the appliance is not working as it should, has been dropped, damaged, left outdoors or dropped into water, return it to a service centre.
• Do not use a charging station with a damaged cord or plug. If the cord or plug is damaged, it must be replaced.
• Always disconnect your robot from the charging station before cleaning or maintaining it.
• Do not use the charging station as a step.
• Charge your robot only with the power supply provided. The provided power supply delivers safety extra-low voltage corresponding to the input marking on the robot which is required to maintain safe operation.
• To prevent the risk of your robot falling downstairs, ensure that the charging station is placed at least 1.2 metres (4 feet) away from stairs.
• Do not allow liquids to get on or into the charging station.

NOTICE
• Product may not be used with any type of power converter. Use of power converters will immediately void the warranty.
• If you live in an area prone to electrical storms, it is recommended that you use additional surge protection. Your charging station may be protected with a surge protector in the event of severe electrical storms.

BATTERY

• Do not open, crush, heat above 80°C (176°F) or incinerate. Follow the Owner's Guide instructions for proper use, maintenance, handling and disposal.
• Do not short-circuit the battery by allowing metal objects to contact battery terminals or immerse in liquid. Do not subject batteries to mechanical shock.
• Lithium ion batteries and products that contain lithium ion batteries are subject to stringent transport regulations. If you need to post this product (with the battery included) for service, travel or any other reason, you MUST refer to the Troubleshooting section of your manual or contact Customer Care for postage instructions.
• Periodically inspect the battery pack for any sign of damage or leakage. Do not charge damaged or leaking battery packs. Do not allow the liquid to come in contact with skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice. Place the battery in a sealed plastic bag and recycle or dispose of safely according to local environmental regulations, or return it to your local authorised iRobot Service Centre for disposal.

• Battery usage by children should be supervised. Seek medical advice immediately if a cell or a battery has been swallowed.

NOTICE
• The battery pack must be removed from the robot before recycling or disposal.
• For best results, only use the Lithium Ion Battery that comes with the robot.
• Do not use non-rechargeable batteries. Use only the rechargeable battery supplied with the product. For replacement, purchase identical iRobot battery or contact iRobot Customer Care for alternative battery options.
• Always charge and remove the battery from your robot and accessories before long-term storage.

This symbol on the battery indicates that the battery must not be disposed of with unsorted common municipal waste.
As the end-user, it is your responsibility to dispose of the endof-life battery in your appliance in an environmentally sensitive manner as follows:
(1) returning it to the distributor/dealer from whom you purchased the product, or
(2) depositing it in a designated collection point.
The separate collection and recycling of end-of-life batteries at the time of disposal will help to conserve natural resources and to ensure that it is recycled in a manner that protects human health and the environment. For more information, please contact your local recycling office or the dealer from whom you originally purchased the product. Failure to properly dispose of end-of-life batteries may result in the negative potential effects on the environment and human health due to the substances in the batteries and accumulators.

About your Roomba^® Robot Vacuum

Top view

Bottom view

Home BaseTM Charging Station

Using Your Roomba^® Robot Vacuum

Positioning the Home Base^TM Charging Station

Note: Do not place your Home Base™ in direct sunlight. Ensure that the area around the dock is free of clutter to improve docking performance.

To prevent the risk of your robot falling downstairs, ensure that the charging station is placed at least 1.2 metres (4 feet) away from stairs.

Download the iRobot Home App and connect to Wi-Fi^®

• Follow the step-by-step instructions to set up your Roomba.
• Set up PrecisionVision Navigation to avoid obstacles in real time.
• Set an automatic cleaning schedule and customise cleaning preferences.
• Create smart maps to tell your robot where and when to clean.

Charging

Light Ring Spiral while charging
White Spiral: charging
Red Spiral: charging, low battery
A solid white light will indicate the battery charge percentage of your robot
• Place the robot on the charging station to activate the battery.
Note: Your robot comes with a partial charge, but we recommend that you charge the robot for 3 hours prior to starting the first cleaning job.
When your robot is fully charged, the light ring indicator will intermittently pulse white at the rear.

• The robot uses a small amount of power whenever it is on the charging station. You can put the robot in a further-reduced power state when not in use. To put your robot into Reduced Power Standby Mode, remove the dust bin and tap the clean button 5 times. To exit Reduced Power Standby Mode, place your robot on the charging station and tap the clean button. For more details on this Reduced Power Standby Mode, refer to the FAQ page on our website.
• For long-term storage, turn off the robot by removing it from the charging station and holding down the clean button for 3 seconds with one wheel off the ground. Store the robot in a cool, dry place.

Cleaning

Tap to Start / Pause / Resume
Hold for 2-5 seconds to end a job
• Your robot will automatically explore and clean your home in neat rows, avoiding obstacles using its front-facing camera. It will return to the charging station at the end of a cleaning job and whenever it needs to recharge. Your robot is able to recognise and avoid objects. However, it is still recommended to remove excess clutter before cleaning.
• To end a job and send the robot back to its charging station, hold the clean button down for 2-5 seconds. A blue light ring pattern will indicate that the robot is seeking the charging station.
• When your robot detects an especially dirty area, it will engage Dirt Detect™ mode, moving in a forwards/backwards motion to clean the area more thoroughly. The light ring indicator will flash blue.
When the robot senses its bin needs to be emptied, the light ring indicator will illuminate in a red sweeping motion towards the rear.

Troubleshooting

• Your robot will tell you something is wrong by playing an audio alert and turning the light ring indicator red. Press the clean button or tap the bumper for details. Check the iRobot Home App for further support.

• After 90 minutes of inactivity off the charging station, the robot will automatically end its cleaning job.
• To factory reset your robot, remove the Dust Bin and hold down the clean button for seven (7) seconds. A sound will let you know when the factory reset has been completed. Press down the clean button once more to confirm.

Battery safety & postage

For best results, only use the iRobot Lithium Ion Battery that comes with your robot.

Lithium ion batteries and products that contain lithium ion batteries are subject to stringent transport regulations. If you need to post this product for service, travel or any other reason, you MUST follow the postage instructions below.
• Battery MUST be turned off before postage.
• Turn off the battery by removing the robot from the charging station and holding down the clean button for 3 seconds with one wheel off the ground. All indicators will turn off.
• Package the robot securely for postage.
• If you need further assistance, contact our Customer Care team or visit global.irobot.com.

Care and maintenance

Care and maintenance instructions

To keep your robot running at peak performance, perform the procedures on the following pages.
There are additional instructional videos in the iRobot Home App. If you notice the robot picking up less debris from your floor, empty the bin, clean the filter and clean the brushes.

Part	Care frequency	Replacement frequency*
Bin	Wash bin as needed
Filter	Clean once a week (twice a week if you have a pet). Do not wash.	Every 2 months
Full Bin Sensor	Clean every 2 weeks
Front Caster Wheel	Clean every 2 weeks	Every 12 months
Edge-Sweeping Brush and Multi-Surface Brushes	Clean once a month (twice a month if you have a pet)	Every 12 months
Sensors and Charging Contacts	Clean once a month
Camera Window	Clean and inspect once a month

Note: iRobot manufactures various replacement parts and assemblies. If you think you need a replacement part, please contact iRobot Customer Care for more information.
*Replacement frequency may vary. Parts should be replaced if there is visible wear.

Emptying the bin

1. Press bin release button to remove bin.

2. Open bin door to empty bin.

3. Place bin back in the robot.

Cleaning the filter

1. Remove the bin. Remove the filter by grasping both ends and pulling out.

2. Remove debris by tapping the filter against your rubbish bin.

3. Reinsert filter with ridged grips facing out. Place bin back in the robot.
Important: The robot will not run if the filter is not installed correctly. Replace the filter every two months.

Cleaning the Full Bin Sensors

1. Remove and empty the bin.

2. Wipe the inner sensors with a clean, dry cloth

3. Wipe the bin door with a clean, dry cloth.

4. Clear any debris from the vacuum path.

Cleaning the Multi-Surface Brushes

1. Pinch the brush frame release tab, lift the tab and remove any obstructions.
   
2. Remove the brushes from the robot. Remove the brush caps from the ends of the brushes. Remove any hair or debris that has collected beneath the caps. Reinstall the brush caps.
   
3. Remove any hair or debris from the square and hexagonal pegs on the opposite side of the brushes.
   
4. Reinstall the brushes in the robot. Match the shape of the brush pegs with the shape of the brush icons in the cleaning head module.
   

Cleaning the Front Caster Wheel

1. Pull firmly on the front wheel module to remove it from the robot.
2. Pull firmly on the wheel to remove it from its housing (see illustration below).
3. Remove any debris from inside the wheel cavity.
4. Reinstall all parts when finished. Make sure that the wheel clicks back into place.
   

Important: A front wheel clogged with hair and debris could result in damage to your floor. If the wheel is not spinning freely after you have cleaned it, please contact Customer Care.

Washing the bin

Important: Do not wash the filter.
Remove the filter before washing the bin.

1. Release the bin, remove the filter and open the bin door.
2. Rinse the bin using warm water.
   
   Note: Bin is not dishwasher safe.
3. Make sure that the bin is completely dry. Reinsert filter and place bin back in the robot.

Cleaning the Edge-Sweeping Brush

1. Use a coin or small screwdriver to remove the screw holding the Edge-Sweeping Brush in place.
2. Pull to remove the Edge-Sweeping Brush. Remove any hair or debris, then reinstall the brush.
   

Cleaning the Sensors, Camera Window and Charging Contacts

Wipe sensors, camera window and charging contacts with a clean, dry cloth.
Note: Inspect the camera window. If you notice any cracks, please contact Customer Care.

Important: Do not spray cleaning solution or water onto the sensors or sensor openings.

iRobot Customer Care

US & Canada

If you have questions or comments about your Roomba^® robot vacuum, please contact iRobot before contacting a retailer.
You can start by visiting global.irobot.com for support tips, frequently asked questions and information about accessories. This information can also be found in the iRobot Home App. If you need further assistance, call our Customer Care team at (877) 855-8593.
iRobot US Customer Care hours
• Monday to Friday: 9.00 AM–9.00 PM Eastern Time
• Saturday and Sunday: 9.00 AM–6.00 PM Eastern Time

Outside the US & Canada

Visit global.irobot.com to:
• Learn more about iRobot in your country
• Get hints and tips to improve your Roomba^® robot vacuum's performance
• Get answers to your questions
• Contact your local support centre

©2021 iRobot Corporation, 8 Crosby Drive, Bedford, MA 01730, US. All rights reserved. iRobot and Roomba are registered trademarks of iRobot Corporation. Home Base and Dirt Detect are trademarks of iRobot Corporation. Wi-Fi and the Wi-Fi logo are registered trademarks of Wi-Fi Alliance.