iRobot Roomba j7+ Owner's Manual page 15
Robot vacuum
Hide thumbs
Also See for Roomba j7+:
- User manual ,
- Owner's manual (73 pages) ,
- Owner's manual (32 pages)
Table of Contents
Advertisement
Available languages
Available languages
Replacing the Bag
1
Lift up on the canister lid to open.
EN
2
Pull up on the plastic card to remove the
bag from the canister.
Note:
This will seal the
bag so dust and debris
cannot escape.
10
For more information, visit global.irobot.com
3
Discard the used bag.
4
Install a new bag, sliding the plastic
card into the guide rails.
5
Press down on the lid making
sure that it is completely
closed.
Note:
To achieve optimal performance
with your robot and automatic dirt
disposal, clean and/or replace your
robot's filter as needed.
Cleaning the Visual Docking
Target and Charging Contacts
Inspect the visual
docking target and
charging contacts to
make sure that they
are clear of debris.
Wipe with a clean,
dry cloth.
Note:
Do not spray
cleaning solution
directly onto
sensors or into
sensor openings.
Removing debris from
Blower Cover
Inspect blower
cover for any lint
or debris build-up,
and wipe with a
clean dry cloth to
remove.
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Roomba j7+ and is the answer not in the manual?
Questions and answers
How put on vacation?
To set the iRobot Roomba j7+ to vacation mode, follow these steps:
1. Remove the robot from the charging station.
2. Hold down the clean button for 3 seconds while keeping one wheel off the ground.
3. All indicators will turn off, confirming that the battery is turned off.
This ensures the robot is powered down for storage or shipping.
This answer is automatically generated
My robot is missing spaces on the carpet, large areas. How can I reprogram to cover these areas.
You can manually guide your Roomba j7+ to cover missed areas using the "footsies" method. Start a cleaning run with room select and, when the robot approaches the missed area, use your feet to block it from leaving. Do not push or shove the robot; just create a barrier with your feet to guide it into the missing section. This method forces the Roomba to recognize and clean the previously missed area.
This answer is automatically generated
Doesn't recognise log in and doesn't communicate with my e-mail Wish it could be operated manually
The iRobot Roomba j7+ may not recognize the login and communicate with your email because it lacks a home button for automated password retrieval in Home Assistant. Unlike older models, the j7+ only has a clean button, which does not provide the same functionality. To operate it manually, you can try retrieving the password using third-party methods, such as the Roomba980-Python repository, or control it through the iRobot app. If manual retrieval does not work, you may need to check for alternative integration methods in Home Assistant.
This answer is automatically generated