iRobot Roomba j7+ Owner's Manual page 13
Robot vacuum
Hide thumbs
Also See for Roomba j7+:
- User manual ,
- Owner's manual (73 pages) ,
- Owner's manual (32 pages)
Table of Contents
Advertisement
Available languages
Available languages
Washing the Bin
Important:
Do not wash the
filter. Remove the filter before
EN
EN
washing the bin.
1
Release the bin, remove the
filter and open the bin door.
2
Rinse the bin using
warm water.
Note:
Bin is not dishwasher safe.
3
Make sure that bin is completely
dry. Reinsert filter and place bin
back in the robot.
8
For more information, visit global.irobot.com
Cleaning the Edge-Sweeping Brush
1
Use a coin or small screwdriver to remove
the screw holding the Edge-Sweeping
Brush in place.
2
Pull to remove the Edge-Sweeping Brush.
Remove any hair or debris, then reinstall
the brush.
Cleaning the Front Caster Wheel
1
Pull firmly on the front wheel module to remove it
from the robot.
2
Pull firmly on the wheel to remove it from its housing
(see illustration below).
3
Remove any debris from inside the wheel cavity.
4
Reinstall all parts when finished.
Make sure that the wheel clicks back into place.
Housing
Important:
A front wheel clogged with hair and debris
could result in damage to your floor. If the wheel is not
spinning freely after you have cleaned it, please contact
Customer Care.
Axle
Wheel
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the Roomba j7+ and is the answer not in the manual?
Questions and answers
How put on vacation?
To set the iRobot Roomba j7+ to vacation mode, follow these steps:
1. Remove the robot from the charging station.
2. Hold down the clean button for 3 seconds while keeping one wheel off the ground.
3. All indicators will turn off, confirming that the battery is turned off.
This ensures the robot is powered down for storage or shipping.
This answer is automatically generated
My robot is missing spaces on the carpet, large areas. How can I reprogram to cover these areas.
You can manually guide your Roomba j7+ to cover missed areas using the "footsies" method. Start a cleaning run with room select and, when the robot approaches the missed area, use your feet to block it from leaving. Do not push or shove the robot; just create a barrier with your feet to guide it into the missing section. This method forces the Roomba to recognize and clean the previously missed area.
This answer is automatically generated
Doesn't recognise log in and doesn't communicate with my e-mail Wish it could be operated manually
The iRobot Roomba j7+ may not recognize the login and communicate with your email because it lacks a home button for automated password retrieval in Home Assistant. Unlike older models, the j7+ only has a clean button, which does not provide the same functionality. To operate it manually, you can try retrieving the password using third-party methods, such as the Roomba980-Python repository, or control it through the iRobot app. If manual retrieval does not work, you may need to check for alternative integration methods in Home Assistant.
This answer is automatically generated