Display; Key Pad - VAMP 140 Operation And Configuration Instructions

VAMP 140
2.2.1.
2.2.2.
8
Overcurrent and earth-fault relay
Operation and Configuration

Display

The VAMP 140 relay is provided with a clear 10 character
alphanumerical LED display, which normally shows a scrolling
text.
Use the SERVICE/Setup/Bright menu to set the brightness of
the display. The display is dimmed after a preset time.
Use the SERVICE/Setup/ScrolDelay menu to set the scrolling
speed of the display text.

Key pad

Use the key pad and the display to navigate through the menus
and to set the required parameters. The keypad comprises the
following keys:
LEFT, RIGHT, UP, DOWN and the ENTER key.
Figure 2.2.2-1 Components of the key pad.
1. Enter and confirmation key (ENTER)
2. UP/DOWN [INCREASE/DECREASE] arrow keys
(UP/DOWN)
3. LEFT/RIGHT arrow keys [for selection of digit position]
(LEFT/RIGHT)
Vamp 24h support phone +358 (0)40 573 6316
VAMP Ltd
VM140.EN011