Operating Measures; Measured Data - VAMP 140 Operation And Configuration Instructions

VAMP Ltd
4.
4.1.
VM140.EN011
Overcurrent and earth-fault relay
Operation and Configuration

Operating measures

General
Carefully study the operating instructions in Chapters 1
through 3 of this manual before any operating measures are
taken or before any relay settings or functions are changed.
The relay can be controlled by means of the MMI on the relay
front panel, a PC running the VAMPSET software, a PC
running suitable terminal software or a remote control system.

Measured data

The measured values can be read from the main menu
MEASURES menu and its submenus shown in the figure
below.
Figure 4.1-1 Measures menu of VAMP 140 relay.
Vamp 24h support phone +358 (0)40 573 6316
VAMP 140
15