Table of Contents
Advertisement
ServSwitch Wizard
4.2 Initial configuration
To perform the initial configuration, you need to connect the Wizard DXS - Digital to an IP network and use a computer located
on the same network to connect to it.
4.2.1 To perform the initial configuration
1 Connect the Wizard DXS - Digital to an IP network where a suitable computer is available on the same subnet (please see the
Installation chapter for connection details).
Figure 4-1. Connect to an IP network where a computer is available on the same subnet
2 Use a computer connected to the same subnet of the network. On that computer, select the VNC viewer icon
A connection details dialog will be displayed:
3 In the 'Server:' entry, type the address:
4 Click the OK button. The viewer window may open straight away (if so continue at step 6) or the system may require user
authentication in which case an authentication dialog will be displayed:
Page 18
DXS - Digital
™
Options button
Provides a range of viewer and connection settings -
192.168.1.42
877-877-2269 | blackbox.com
Enter the Wizard DXS - Digital address here and click OK
If required, select the encryption mode
MORE [+]
Advertisement
Table of Contents
