Table of Contents
Advertisement
ServSwitch Wizard
4. Configuration
4.1 Connecting to Wizard DXS - Digital
Connection to (and configuration of) Wizard DXS - Digital is carried out over a network, using a VNC Viewer program running on
a computer or mobile device. VNC Viewers are available for most computers, tablets and smartphones.
• If you already have a VNC viewer, please follow the Initial configuration instructions given on the next page.
If you do not already have a VNC viewer, there are three options:
• You can download a Windows VNC Viewer from the Wizard DXS - Digital itself.
• You can download the latest VNC Viewers for most operating systems via the RealVNC website, or for tablets and
smartphones from the appropriate app store.
• Without downloading anything, you can run a Java version of the VNC Viewer inside your web browser.
4.1.1 To download a Windows VNC Viewer from the Wizard DXS - Digital unit
Note: The version of VNC supplied within the Wizard DXS - Digital supports audio, however, audio is not supported in the later
viewers from RealVNC.
1 Connect the Wizard DXS - Digital to an IP network where a suitable computer is available on the same subnet (please see the
Installation chapter for connection details).
2 On that computer, open an internet browser and enter the default local IP address used by the Wizard DXS - Digital:
http://192.168.1.42
The Wizard DXS - Digital welcome screen should be displayed.
3 Click the link Download the Windows VNC Viewer from unit.
4 Once the file is downloaded, run it and follow the on screen instructions to open a VNC connection to the Wizard DXS -
Digital. (The VNC Viewer is a single executable file which does not require an 'installation' step. Simply put the file in a suitable
place (such as the Desktop) and run it from there.)
Page 16
DXS - Digital
™
877-877-2269 | blackbox.com
Advertisement
Table of Contents
