Display Status; Maximum Luminance Demo - Barco Nio 5MP LED User Manual

Hide thumbs Also See for Nio 5MP LED:
Table of Contents

Advertisement

Advanced operation
To retrieve info about your display:
1.
Bring up the OSD main menu.
2.
Navigate to the About this Display menu to make the information visible on the screen.

4.21 Display status

About display status
The Status submenu of the OSD menu provides info on the current status of your display (runtimes,
temperatures, etc.), the status of the connected image sources (video encoding mode, timings, etc.) and the
current calibration status of your display (display function, luminance, ALC, etc.).
To retrieve the status of your display:
1.
Bring up the OSD main menu.
2.
Navigate to the Status menu.
3.
Enter the Display, Image Sources or Calibration submenu as desired.

4.22 Maximum luminance demo

About maximum luminance demo
The maximum luminance demo sets the luminance of the LCD panel to its maximum value for 60 seconds, or
until the demo is manually cancelled. The actually measured luminance is shown on-screen.
While activated, the maximum luminance demo disables the display's uniformity correction and sets
the Color Preset to Native White. When the maximum luminance demo is cancelled, the original
settings are restored.
To activate the maximum luminance demo
1.
Bring up the OSD main menu.
2.
Navigate to Enable Service mode.
3.
Enter the keycode: 9-0-0-1.
4.
Enter the Service menu.
5.
Navigate to the Maximum Luminance demo submenu and confirm. The maximum luminance demo is
activated.
6.
Press the jog dial to manually cancel the maximum luminance demo, or wait for 60 seconds after which
the demo is automatically cancelled.
32
K5902121 /04
Nio 5MP LED

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mdng-5221

Table of Contents