Table of Contents
Advertisement
Advanced operation
4.1 OSD menu language
About the OSD menu language
By default, the OSD menu comes up in English. However, there's a wide range of other languages available
for the OSD menu of your Nio 5MP LED.
To change the language of the OSD menu:
1.
Bring up the OSD main menu.
2.
Navigate to the Configuration > User Interface > Menu menu.
3.
Enter the Language submenu.
4.
Select one of the available languages and confirm.
4.2 OSD menu automatic close function
About the OSD menu automatic close function
By default, the OSD menu will disappear automatically after approximately 90 seconds of inactivity. However,
this function can be disabled so that the OSD menu remains on the screen until manually closed.
To enable/disable the OSD menu automatic close function:
1.
Bring up the OSD main menu.
2.
Navigate to the Configuration > User Interface > Menu menu.
3.
Enter the Automatic Close submenu.
4.
Select Enabled/Disabled as desired and confirm.
4.3 Power LED
About the power LED
To prevent distractions, the power LED is off by default when the display is switched on and used in normal
operation. This behavior can be changed so that the power LED will light up during normal operation. Below is
an overview of the different power LED states, in ascending order of power consumption:
Display status
Off
3
Hibernate
4
/ Soft off
5
6
Suspend mode
Standby mode
6
Normal operation
To enable/disable the power LED:
1.
Bring up the OSD main menu.
2.
Navigate to the Configuration > User Interface > Indicator Lights menu.
3.
Power supply unplugged or switched off.
4.
Requires DPMS mode and Hibernate to be enabled in the OSD menu.
5.
Switched off via the standby touch key.
6.
Requires DPMS mode to be enabled in the OSD menu.
22
K5902121 /04
Nio 5MP LED
Power LED behavior
Off
Steady amber
Slow blinking amber
Fast blinking amber
Off (power LED disabled in OSD, default setting)
Steady white (power LED enabled in OSD)
Advertisement
Table of Contents
