Uniden XTRAK 50 Series Owner's Manual
  1. Manuals
  2. Brands
  3. Uniden Manuals
  4. Transceiver
  5. XTRAK 50 Series
  6. Owner's manual

Uniden XTRAK 50 Series Owner's Manual

Uhf cb handheld transceiver
Hide thumbs
Table of Contents

Advertisement

Quick Links

50 Series
UHF CB HANDHELD
TRANSCEIVER
For more exciting new products please visit our website:
Australia: uniden.com.au

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XTRAK 50 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Uniden XTRAK 50 Series

Summary of Contents for Uniden XTRAK 50 Series

  • Page 1 50 Series UHF CB HANDHELD TRANSCEIVER For more exciting new products please visit our website: Australia: uniden.com.au...
  • Page 2 Warning WATERPROOF: IP67 Uniden’s XTRAK 50 / XTRAK 50 PRO radio is designed to meet the water & dust ingress standard of IP67. This Means: Being defined as able to withstand water splashes from any direction. The XTRAK 50 / XTRAK 50 PRO will only meet this rating if fully assembled and all knobs, covers and fittings are well maintained and correctly fitted. This means that the accessory cover is fully closed, and the battery pack and antenna are attached and securely fastened. Note: Radio does not retain its IP67 rating when an accessory Earpiece or Speaker MIC is connected.

  • Page 3: Table Of Contents

    Display Dimmer Key Lock LED Torch / S.O.S Strobe Operation | Special Features Instant REPLAY (Receiver Record & Playback) 28-29 MASTER SCAN (Uninterrupted transmit & receive) 29-31 Bluetooth App (XTRAK 50 PRO Only) 31-32 Bluetooth Audio (XTRAK 50 PRO Only) CTCSS & DCS Codes and Frequencies 33-34 UHF-CB Channel Guidelines, Channels & Frequencies 35-37 Warranty UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...

  • Page 4: Introduction | Features

    Radio meets waterproof (IP67) • Busy CH Lock-out Function specifications only when • 50 CTCSS (Continuous Tone battery, antenna and Accy jack cap are correctly fitted. Coded Squelch System) codes • 104 DCS (Digital Coded Squelch) XTRAK 50 PRO only. codes Note: Features and specifications are subject to continual improvement & change. UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...

  • Page 5: Included In Your Package

    Cig-Lead Adaptor Cig-Lead Charger (Kit) Speaker Mic Earpiece Mic Mag. Mount Antenna Hang-up Bracket & Clip Hard Carry Case Owner’s Manual NOTE: If any of these items are missing from the box, contact your place of purchase immediately. Optional Accessories • Speaker Mic • Earpiece Mic Visit the XTRAK 50 / XTRAK 50 PRO page on the website for more information on the availability & range of optional accessories; www.uniden.com.au UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...

  • Page 6: Controls And Indicators

    - Press to use current function - Press & hold in Menu mode to - Press & hold to change function save and exit Torch /S.O.S Strobe LED / [MEM] Scan memory key [TORCH /S.O.S] - Press & hold in standby mode Press to toggle: 17 [ ] Channel / Menu list UP Torch ON > S.O.S > Torch OFF ] Channel / Menu list DOWN [KEY LOCK] 18 [SCAN] SCAN key Press & hold to lock / unlock / [OS/GS/MS] Scan mode 10 Transmit (Red) /Receive (Green) Open Scan / Group Scan / LED Indicator Master Scan 11 Speaker UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...
  • Page 7 INST CH is the Instant CH M.S - Master Scan SCR Voice Scramble is On SCAN - Flashes during scan Transceiver status Q Sub Code Type TX - Transmitting DCS / CTCSS CALL - Sending Call Tone R Sub Code No. VOX - Voice activation EQL status RX - Receiving a Signal (apears during RX only) MON - Monitor mode UHF CB Channel Replay status *XTRAK 50 PRO Only - Replay Rec. is ON - Replay Rec. is OFF REPLAY - Playback is on UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...

  • Page 8: Getting Started

    Attaching the Beltclip The belt clip attaches to the battery pack and may be pre-installed for convenience on some model packages. To attach the belt clip: 1. Slide the belt clip into the catch at the top of the battery until it snaps into place. To remove the belt clip: 1. Pinch and hold the belt clip latch and then slide the belt clip up and out of the catch. (Belt clip can be removed from the battery even when installed in the radio.) UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...
  • Page 9 Getting Started Attaching the Battery Pack 1. Install the battery pack into the back of the radio making sure the tabs at the top of the battery slide in first. 2. Press together the bottom of the battery pack and the radio, and then close the battery latch until it locks the battery in place. Avoid exposing the Lithium Ion battery, attached or unattached to the radio, in direct sunshine, heated cars, or in areas with temperatures below –20°C (–4°F) or above +60°C (+140°F). Exposing the chemicals contained within the battery pack to temperatures above +60 °C (+140°F) may cause the battery CAUTION to rupture, fail or reduce performance. In case of exposure to cell contents, wash the affected area thoroughly, and seek medical attention. Additional battery cautions should be applied as described on page 2. UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...

  • Page 10: Connect The Drop-In Charger With Ac Adaptor

    Charging the Battery Pack Your radio is powered by a specially designed Lithium Ion battery pack. • Before operating the XTRAK 50, charge the Lithium Ion battery pack for 4 hours without interruption in the drop-in charger. For the initial battery charge, make sure the radio is off for optimum charging. NOTE 1. Place the XTRAK 50 in the drop-in charger. 2. If the radio battery is charging, the LED illuminates red and stays red until fully charged, then it illuminates green. • The charger won’t overcharge the battery pack. When charging is completed, the charge LED changes colour from red to green. • You can monitor incoming calls while the XTRAK 50 is in the drop-in charger. • Do not transmit when the XTRAK 50 is in the drop-in charger! UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...

  • Page 11: Battery Level Display & Automatic Battery Save

    LEVEL 2 Battery approx. 25% capacity LEVEL 1 Battery low Recharge the battery at any time. From empty, the battery will take up to 4 hours to fully charge. NOTE Battery life, based on below duty cycle with minimum settings (Dimmer low, Bluetooth off (XTRAK 50 PRO only), Replay off): - up to 30 Hours at 1W and up to 20 Hours at 5W Duty Cycle: Transmit 5% Receive 5% Stand-by 90% Automatic Battery Save The Automatic Battery Save feature extends the battery life by switching to power save mode if it remains out of operation for 5 seconds. This feature automatically activates during standby mode (RX mode without a signal). Accessory Jack (SPKR/MIC) Cover Make sure the Accessory jack cover is firmly pushed in to maintain waterproof rating. Release the Accessory jack cover to plug in an optional Speaker MIC or Earpiece MIC. UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...

  • Page 12: Operation Menu

    * XTRAK 50 PRO only Each MENU function is described in their respective operations To use the MENU: ] or [ ] to highlight a menu option. 1. Press [MENU] and then press [ 2. Press [MENU] to select the option. 3. Press [ ] or [ ] to highlight a setting option. 4. Press & hold [MENU] to store the setting and exit menu mode. UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...

  • Page 13: Power On/Off | Volume

    To turn the unit ON, rotate the [ON/OFF VOL] clockwise. After the start up screen displays, a channel number and battery level should appear on the display. To turn the unit OFF, rotate the [ON/OFF VOL] knob counter-clockwise. The display will turn off. Volume Rotate the [ON/OFF VOL] knob clockwise or counter-clockwise to adjust speaker volume to a desired listening level. Selecting a Channel Press [ ] or [ ] to select the desired channel. For your reference a list of the available channels, corresponding frequencies and guidelines for their use and selection is printed on page 37. For Australia, Channels 05 NOTE and 35 are reserved for Emergency Calls. UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...

  • Page 14: Squelch

    To set the "Squelch Gate" to the desired level, turn [SQ] counter-clockwise until you hear noise. Then turn the [SQ] clockwise just until the noise stopped. Now only the desired signal can get through. UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver If an incoming signal is very weak there is a...

  • Page 15: How To Transmit And Receive | High/Low Transmit Power

    ] or [ ] to select a power level setting. 4. Press & hold [MENU] to store the setting and exit menu mode. To Transmit and Receive: 1. Before you transmit, listen for activity on the selected channel. 2. When the channel is clear, press and hold the [PTT] to transmit. While [PTT] is pressed the transmit/receive LED lights up red and the TX icon displays. Hold the radio with microphone approximately five cms in front of your mouth with the antenna at approximately 45° angle away from your head. Speak in a clear, normal conversational voice. 3. When you have finished speaking, release the [PTT] and listen for a response. The transmit/received LED turns off and the TX icon disappears from the display. When a transmission is being received by your radio the transmit/ receive LED lights up green and the RX icon and current EQL level icon displays. UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...

  • Page 16: Smart Key Operaton

    MON - Monitor mode on/off PAIR - Pair (XTRAK 50 PRO only) 1. Press & hold the [S] key to set the next function. The icon for the function will display. 2. Press [S] to use the current function. Instant Channel Function (Priority Channel) The Instant Channel Function allows a one-touch toggle between a priority channel and the current channel. To use Instant Channel: By default the SMART [S] key is set to the Instant Channel function. When the SMART key is set to INST; 1. Press [S] to go to the stored Instant channel. • The default channel is the emergency CH 05. • The Instant channel is always indicated by the INST icon. 2. Press [S] again to return to the previous channel. UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...

  • Page 17: Call Function | Call Tone (Selecting A Call Tone)

    Selecting a Call Tone Select from 10 calling tones to use with the Call Tone function. To change the Call Tone pattern: 1. Press [MENU]. Press [ ] or [ ] until 12 Call Tone is highlighted. 2. Press [MENU] again.The setting displays at the current tone pattern. ] or [ ] to select a desired tone pattern. 3. Press [ 4. Press & hold [MENU] to store the setting and exit menu mode. UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...

  • Page 18: Eql (Equaliser - Voice Enhance Setting)

    EQL 0: Normal - Standard or FLAT. EQL 1: Bass - Enhanced low frequencies, sound quality becomes mild and easy to listen to, not causing fatigue. EQL 2: Midrange - Enhanced midrange frequencies, sound quality becomes clear. EQL 3: High - Enhanced the high frequencied, sound quality becomes sharp. When a signal is received, except for when in Monitor mode, the current EQL level will display. NOTE Monitor Mode When the SMART key is programmed to MON; 1. Press [S] to turn Monitor mode On or Off. Monitor mode is also entered when the SQL level is set to Sq0. Pairing (XTRAK 50 PRO Only) XTRAK 50 PRO only - See Bluetooth Audio page 32. UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...

  • Page 19: Using A Repeater Channel | To Operate In Duplex Mode

    Standard Operation without the aid of a Repeater Station Operation with the aid of a Repeater With Duplex operation, the signal coming from your radio is received by the Repeater station and then re-transmitted at the same time on another channel. For example: 1. CH01 is on Duplex Mode - will receive on CH01 but Transmit on CH31 2. CH41 is on Duplex Mode - will receive on CH41 but Transmit on CH71, etc... Refer to UHF-CB Channel & Frequencies table on p.35 - p.37. If you transmit on CH01 Duplex mode, you are actually transmitting on CH31, and the repeater station down-converts your signal and retransmits on CH01. UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...
  • Page 20 To Operate in Duplex Mode (using a Repeater) Only channels 01 - 08 and 41 - 48 are available for Duplex. 1. Press [MENU]. Press [ ] or [ ] until 05 Duplex is highlighted. 2. Press [MENU] to select. ] or [ ] to turn Duplex mode On or Off. 3. Press [ 4. Press & hold [MENU] to save the setting and exit menu mode. DUP icon appears beside the channel when Duplex setting is enabled for a duplex capable channel. • Search online for available UHF-CB repeaters in your area. • Check local repeater availability using the NOTE XTRAK App (XTRAK 50 PRO only). UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...

  • Page 21: Scanning

    Channels from SCAN Memory on page 22. What is Open Scan (OS) Mode? OS scans all memory (MEM) channels in the OS scan memory. If an active channel is found, scanning will pause on that channel while there is a signal. What is Group Scan (GS) Mode? Allows you to monitor the Instant Channel (as a Priority Channel) while scanning the GS memory (MEM) channels. See To store a new channel as the Instant Channel, page 17 for how to set the Priority channel. If GS Scanning is initiated when there are no channels programmed in GS scan memory, an error tone will be heard and scanning will not start. NOTE UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...

  • Page 22: Add/Remove Channels From Scan Memory

    ] to select the channel you want to store. 3. Press & hold [MEM] for 1.5 secs. to store. MEM icon appears and a short tone beep is heard. 4. To remove the channels from Memory: Press & hold [MEM] for 1.5 seconds once more. Two short tone beeps are heard and the MEM icon disappears. To Start Channel SCAN 1. Press [SCAN] and the radio will begin scanning the channels that are in the OS or GS memory - depending on which of these is currently active. SCAN icon flashes during scanning. Scan Direction SCAN will begin scanning for active channels in a sequential order. You can change the scan direction (increasing or decreasing channel ] or [ number) by pressing [ Drop-out delay When SCAN finds a busy channel it pauses scan to receive the signal. When the received signal stops, the radio waits for 3 seconds for the return of the signal, otherwise, the radio resumes scanning. Recent Active Channels SCAN remembers recent active channels and monitors these channels for activity while scanning through the scan memory. This means if recently active channels become active again during SCAN, the radio will pause on these channels first. This makes scanning for active channels more efficient (faster) the longer SCAN is operating. UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...

  • Page 23: Priority Watch For Group Scan

    If SCAN is deactivated while it is tuned to an active channel, the XTRAK will stay on that active channel. If SCAN is deactivated while in-between active channels, the XTRAK will reinstate the last active channel. NOTE If SCAN is deactivated when no active channel has been found, the XTRAK will reinstate the starting channel. Priority Watch for Group Scan To switch Priority Watch On/Off; 1. Press [MENU] and then press [ ] or [ ] until 06 Priority Watch is highlighted. 2. Press [MENU] to select the option. 3. Press [ ] or [ ] to highlight On or Off. 4. Press & hold [MENU] to store the setting. UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...

  • Page 24: Ctcss / Dcs

    ] until 03 CTCSS / DCS is 1. Press [MENU] and then press [ highlighted. 2. Press [MENU] to select the option. 3. Press [ ] or [ ] to select a CTCSS or DCS code. • There are 50 CTCSS codes available. • There are 104 DCS codes available • To turn off CTCSS / DCS, select OFF. 4. Press & hold [MENU] to store the setting and exit menu mode. CTCSS or DCS icon, and the code number appears when a code is selected for a channel. Channels 5 and 35 are used for emergency channels. CTCSS/DCS will not operate on these channels. NOTE UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...

  • Page 25: Bcl (Busy Channel Lockout)

    3300 Hz, 2952 Hz, 3039 Hz, 3200 Hz, 3400 Hz. Make sure other radios you are communicating with are using the same scramble frequency. 1. Press [MENU] and then press [ ] or [ ] until 04 Scramble is highlighted. 2. Press [MENU] to select the option. 3. Press [ ] or [ ] to select a desired scramble frequency. 4. Press & hold [MENU] to store the setting and exit menu mode. SCR icon displays when Scramble is enabled. Scramble cannot be enabled on channels 05 & 35 (emergency channels) and channel 11 (road channel). NOTE UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...

  • Page 26: Vox (Voice Activated Transmit)

    4. Press & hold [MENU] to store the setting and exit menu mode. Key Beep Key Beep is the tone that sounds after a key press. 1. Press [MENU] and then press [ ] or [ ] until 14 Key Beep is highlighted. 2. Press [MENU] to select the option. 3. Press [ ] or [ ] to select On or Off. 4. Press & hold [MENU] to store the setting and exit menu mode. UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...

  • Page 27: Display Dimmer

    4. Press & hold [MENU] to store the setting and exit menu mode. Changing the dimmer level will affect the battery operating time (see Battery Level Display, page 11). For optimum battery operating time, set to low. NOTE ______________ Key Lock To prevent accidental entries, you can lock the keypad. Only [PTT] and [ON/OFF VOL] are accessible when Key Lock is activated. Press & hold [KEY LOCK] until it beeps to activate or deactivate Key Lock. icon appears at the top of the display when activated. LED Torch / S.O.S Press [KEY LOCK] to toggle the LED torch between these options; Torch ON > S.O.S strobe > Torch OFF Torch and S.O.S are only available when XTRAK is powered on. NOTE UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...

  • Page 28: Operation | Special Features

    When on, Instant Replay automatically records receive signals in the normal channel mode and SCAN mode. Press [R] at anytime to; 1. Playback the most recent received signal or, 2. Playback the most recent recorded signal in the replay buffer (if Instant Replay automatic receive record was turned Off, see Turning Instant Replay On/Off below). During playback the display shows REPLAY and the number of the currently playing recording. After the most recent received signal has been played back, a long confirmation tone sounds and the radio returns to the previous mode. During playback older recordings can be accessed by pressing [ ] or ] to skip forward/back between recordings stored within the buffer. The record number indicates which discrete recording is currently being replayed. • Received signals shorter than 500ms are not recorded. • Automatic recording of receive signal(s) is temporarily suspended during Instant Replay playback. • Older recordings are automatically overwritten when new recordings are stored. • Most received communications are short and the record NOTE buffer may contain several recordings. • Instant Replay does not record when in monitor mode (Sq0 setting in normal channel mode). • Transmissions (TX) are not recorded. UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...

  • Page 29: Master Scan (Uninterrupted Transmit & Receive)

    ] to select On or Off. 3. Press [ 4. Press & hold [MENU] to store the setting and exit menu mode. MASTER SCAN (Uninterrupted Transmit & Receive) Master Scan is a Transmit & Receive mode, using scan, that will allow continual comunication across congested channels. Use Master Scan with other radios that are also set up to the same Mas- ter Scan settings. Master Scan will not work on its own or if its settings are different from other radios using Master Scan. The two settings all radios in your Master Scan network must share are; - Scanning the same set of channels from Group Scan (GS) memory - Using the same CTCSS/DCS code For your convenience, by default; - Channels 09-20 are stored into GS Memory and - CTCSS 01 is set as the Master Scan subcode. By scanning only group channels for the group subcode, radios in the network will be able to detect and receive group transmissions - con- tinual communication without interruption. When transmitting in this mode, the radio switches to an unused group channel if it detects another signal with no CTCSS/DCS code, or the wrong code, on the channel last used by the group. In this way, all group users will be able to have continual communication within their group. UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...
  • Page 30 RX only Channels (CH22, CH23, CH61, CH62 and CH63) and Emergency Channels (CH05, CH35) will not be included in Master Scan Mode even though stored into GS Memory. Also channels for which Duplex Setting is On will NOTE be skipped in Master Scan Mode. Second, Select a Master Scan subcode 1. Press [MENU] and then press [ ] or [ ] until 09 M.Scan Code is highlighted. 2. Press [MENU] to select. 3. Press [ ] or [ ] to select a CTCSS or DCS code. 4. Press and hold [MENU] to save & exit from the menu mode. UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...

  • Page 31: Bluetooth App (Xtrak 50 Pro Only)

    Once Master Scan has been set up for your radio and other radios in your network, simply press [SCAN] to enable or disable M.SCAN. The SCAN icon flashes in this mode. When SCAN is enabled for Master Scan, simply use the radio (Transmit and Receive) as you would normally. Using Master Scan should feel like using a normal single channel. Bluetooth® APP (XTRAK 50 PRO Only) Through the built-in Bluetooth feature the XTRAK 50 PRO works with the free XTRAK App, available on the Apple Store for iOS smartphones and the Play Store for Android smartphones. Search for the XTRAK App by Uniden. User instructions for the app are embedded in the app. Installing XTRAK App on your smartphone and connecting your smart- phone to your radio over bluetooth allows you to share your location, even without mobile phone service. In addition, it offers recording tracks and controlling the radio settings from the convenience of your smart- phone. The instructions below are only a brief introduction as all instructions are provided within the XTRAK App. Turn the Bluetooth App setting On when you are ready to connect with a compatible smartphone running the XTRAK App. The Bluetooth® word mark and logos are registered trade- marks owned by Bluetooth SIG, Inc. and any use of such marks by Uniden is under license. Other trademarks and trade names are those of their respective owners. Apple and the Apple logo are trademarks for Apple Inc., registered NOTE in the U.S. and other countries. App Store is a service mark of Apple Inc. Android, Google Play, and the Google Play logo are trademarks of Google Inc. UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...

  • Page 32: Bluetooth Audio (Xtrak 50 Pro Only)

    PAIR - see SMART Key Operation page 16. Enable Bluetooth Audio 1. Press [MENU], then use [ ] or [ ] to highlight 18 Bluetooth Audio. 2. Press [MENU] to select. 3. Press [ ] or [ ] to select On or Off. 4. Press and hold [MENU] to save & exit from the menu mode. The 2nd Bluetooth signal icon will flash indicating awaiting pairing or connection, and will stay steady after paring/connection. Pair/Connect to a Compatible Bluetooth audio device. 1. On the compatible bluetooth audio device, initiate pairing. 2. Press [S] (SMART key must be set to PAIR). Compatible with Bluetooth 5.0 devices. NOTE UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...

  • Page 33: Ctcss & Dcs Codes And Frequencies

    88.5 218.1 91.5 225.7 94.8 233.6 97.4 241.8 100.0 250.3 103.5 69.4 107.2 159.8 110.9 165.5 114.8 171.3 118.8 177.3 123.0 183.5 127.3 189.9 131.8 196.6 136.5 199.5 141.3 206.5 146.2 229.1 151.4 254.1 156.7 UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...
  • Page 34 DCS Codes and Frequencies DCS Code DCS Code DCS Code Code No. Code No. Code No. (Octal) (Octal) (Octal) UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...

  • Page 35: Uhf-Cb Channel Guidelines, Channels & Frequencies

    • Channels 01-08 (and 31-38), and Channels 41-48 (and 71-78) are repeater channels. Important information - 80 Channel UHF-CB channel expansion To provide all users additional channel capacity within the UHF-CB Band. The ACMA will change the majority of the current wideband 40 channel use to narrowband channel use. This allows for additional channels to be added, up to 80 Channels. This simply means that the new narrowband radio you have purchased will have more channels than older radios. Please refer to the guidelines above and the channel chart for further channel information. A list of currently authorised channels can also be obtained from the ACMA website in Australia and the MED website in New Zealand. Interference / Poor Audio When a new narrowband radio receives a signal from an older NOTE wideband radio the speech may sound loud. Narrowband radios operating on CH41 - CH80 may encounter interference from a nearby wideband radios transmitting on high power on an adjacent channel (frequency). When an older wideband radio receives a signal from a new narrowband radio the speech may sound quiet - the wideband radio user simply adjusts their radio volume for best performance. The above situations are not a fault of the radio but a symptom of mixed wideband and narrowband radios in current use. It is expected that as older wideband radios are phased out this issue will be eliminated. UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...
  • Page 36 477.275 (CH35) 477.025 476.550 477.300 (CH36) 477.050 476.575 477.325 (CH37) 477.075 476.600 477.350 (CH38) 477.100 476.625 477.125 476.650 477.150 476.675 477.175 476.700 477.200 476.725 477.225 476.750 477.250 476.775 477.275 476.800 477.300 476.825 477.325 476.850 477.350 476.875 477.375 476.900 477.400 UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...
  • Page 37 477.2875 (CH 75) 477.0375 476.5625 477.3125 (CH 76) 477.0625 476.5875 477.3375 (CH 77) 477.0875 476.6125 477.3625 (CH 78) 477.1125 476.6375 477.1375 476.6625 477.1625 476.6875 477.1875 476.7125 477.2125 476.7375 477.2375 476.7625 477.2625 476.7875 477.2875 476.8125 477.3125 476.8375 477.3375 476.8625 477.3625 476.8875 477.3875 476.9125 477.4125 UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...

  • Page 38: Warranty

    Warranty UNIDEN XTRAK 50, XTRAK 50 PRO Series UHF CB Transceiver IMPORTANT: Satisfactory evidence of the original purchase is required for warranty service Please refer to our Uniden website for any details or warranty durations offered in addition to those contained below. Warrantor: The warrantor is Uniden Australia Pty Limited ABN 58 001 865 498 (“Uniden”). Terms of Warranty: Uniden Aust warrants to the original retail purchaser only that the XTRAK 50 Series, or XTRAK 50 PRO Series (“the Product”), will be free from defects in materials and craftsmanship for the duration of the warranty period, subject to the limitations and exclusions set out below. Warranty period: This warranty to the original retail purchaser is only valid in the original country of purchase for a Product first purchased either in Australia or New Zealand. Product 3 Years Battery Pack &...
  • Page 39 Statement of Remedy: If the Product is found not to conform to this warranty as stated above, the Warrantor, at its discretion, will either repair the defect or replace the Product without any charge for parts or service. This warranty does not include any reimbursement or payment of any consequential damages claimed to arise from a Product’s failure to comply with the warranty. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. This warranty is in addition to and sits alongside your rights under either the COMPETITION AND CONSUMER ACT 2010 (Australia) or the CONSUMER GUARANTEES ACT (New Zealand) as the case may be, none of which can be excluded. Procedure for obtaining warranty service: Depending on the country in which the Product was first purchased, if you believe that your Product does not conform with this warranty, you should deliver the Product, together with satisfactory evidence of your original purchase (such as a legible copy of the sales docket) to Uniden. Please refer to the Uniden website for address details. You should contact Uniden regarding any compensation that may be payable for your expenses incurred in making a warranty claim. Prior to delivery, we recommend that you make a backup copy of any phone numbers, images or other data stored on your Product, in case it is lost or damaged during warranty service. UNIDEN AUSTRALIA PTY LTD Phone: 1300 366 895 Email: custservice@uniden.com.au UNIDEN XTRAK 50 Series Handheld UHF-CB Transceiver...
  • Page 40 © 2021 Uniden Australia Pty Limited. Printed in PRC...

Table of Contents

Save PDF