Change Fieldserver Password; Figure 60: Fieldserver Password Update Via Fs-Gui - MSA fieldserver EZ Gateway M-Bus to Modbus & BACnet Startup Manual

9.2.4

Change FieldServer Password

•
Click the Password tab.
•
Change the general login password for the FieldServer as needed.
NOTE: The password must meet the minimum complexity requirements. An algorithm
automatically checks the password entered and notes the level of strength on the top right
of the Password text field.
NOTE: If a gateway in the field is updated to a secure gateway, the password will change to
"admin". This change will still occur if the gateway was already setup with a unique
password that was loaded in the factory and printed on the label.

Figure 60: FieldServer Password Update via FS-GUI

EZ Gateway Start-up Guide
Additional Information
52