Table of Contents
Advertisement
7
Using the EZ Gateway
7.1
Find Devices Using M-Bus Explorer Page
•
Click on the M-Bus Explorer tab on the left side of the screen to go to the M-Bus Explorer page.
•
To find M-Bus devices connected to the same subnet as the EZ Gateway, click the Discover button
(binoculars icon).
•
This will open the Device Discovery window, select Secondary Address or Test Address, then fill
in the desired device ID range/baud rate(s) and click Discover to start the search.
Figure 24: M-Bus Explorer Page
Figure 25: Device Discovery Window
EZ Gateway Start-up Guide
Using the Gateway
24
Advertisement
Table of Contents
Need help?
Do you have a question about the fieldserver EZ Gateway M-Bus to Modbus & BACnet and is the answer not in the manual?
Questions and answers