Edit The Certificate Loaded Onto The Fieldserver; Figure 53: Fs-Gui Security Setup - Certificate Loaded - MSA fieldserver EZ Gateway M-Bus to Modbus & BACnet Startup Manual

9.1.2

Edit the Certificate Loaded onto the FieldServer

NOTE: A loaded certificate will only be available if the security mode was previously setup as
HTTPS with own trusted TLS certificate.
•
Click Security in the Navigation panel.
•
Click the Edit Certificate button to open the certificate and key fields.
•
Edit the loaded certificate or key text as needed.
•
Click Save.
Figure 53: FS-GUI Security Setup – Certificate Loaded
EZ Gateway Start-up Guide
Additional Information
47